Samsung CL-29A5P, CL-29A5W, CL-29A6P, CL-29A6W, CL-29A7P, CL-29A7W, CL-29M6P, CL-29M6W, CL-34M9P

Page 15

I N S T A L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is connected to the ANTENNA OUT terminal on your cable box.

2

Connect the other end of this cable to the VHF/UHF antenna terminal on the back of the TV.

▼	This terminal might be labeled

“ANT OUT,” “VHF OUT,” or simply, “OUT.”

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.

▼	This terminal might be labeled

“ANT IN,” “VHF IN,” or simply, “IN.”

2

Connect this cable to a two-way splitter.

3

Connect a coaxial cable between an OUTPUT terminal on the splitter and the IN terminal on the cable box.

CHAPTER TWO: INSTALLATION 2.3

Image 15

Contents Importer AA68-01186CENGRisk of Electric Shock N O T Open Thank You for Choosing Samsung Example Antenna Grounding Installation Your New TVOperation Troubleshooting Special FeaturesChapter One List of FeaturesFamiliarizing Yourself with The TV Side Panel Jacks Audio Input jacks Video Input jack´ Video Input jack ¨ Headphone jack AUDIO-VIDEO Monitor Output jacks Rear Panel JacksVideo Input jack ¨ Super Video Input jack DVD Video Input jacksSize Remote Control´ Number buttons +100Press to fast forward a tape Remote Control ˜ VCR controlsPIP Controls Press to play the tapeAntennas with 300-ohm Flat Twin Leads Connecting VHF and UHF AntennasCable without a Cable Box Connecting Cable TVAntennas with 75-ohm Round Leads Separate VHF and UHF AntennasConnecting to a Cable Box that Descrambles All Channels Connecting to a Cable Box that Descrambles Some ChannelsConnect this cable to a two-way splitter Unplug the cable or antenna from the back of the TV Connecting a VCRInstall AT I O N Connecting an S-VHS VCR Make sure the jacks you are using are underneath the numberConnecting a Second VCR to Record from the TV Connecting a DVD PlayerConnecting a Camcorder Installing Batteries in the Remote Control Plug & Play Feature Press PowerTurning the TV On and Off Press Menu button If you want to reset this featureViewing the Menus and On-Screen Displays Viewing the MenusViewing the Display Press Menu to display the menu Selecting a Menu LanguageMemorizing the Channels Selecting the Video Signal-sourcePress MENU, then press CH twice to select Channel Storing Channels in Memory Automatic MethodPress Menu Press CH or CH to select Select Adding and Erasing Channels Manual MethodPress MENU, then pess CH twice to select Channel Press CH or CH to select Add/Erase Press VOL+Changing Channels Adjusting the VolumeZ,*, blank,0,1,...9 Labeling the ChannelsSetting the Clock Press the Menu button to display the on-screen menuPress the CH or CH button to select the correct minutes Customizing the Picture Press Menu to display menuPress Menu four times to exit Using Automatic Picture Settings Customizing the Sound Using Automatic Sound Settings VOL+ Setting The On/Off MelodyViewing a VCR or Camcorder Tape Customizing Your Remote Control Setting Up Your Remote Control to Operate Your VCRTurn off your VCR On your Samsung remote control, press SET VCR Codes Setting Up Your Remote Control to Operate Your Cable Box Cable BoxCodes Fine Tuning Channels Digital Noise Reduction Press the Menu button to display the menu LNA Low Noise AmplifierTilt Changing the Screen Size Using the R.Surf Press CH or CH to select the appropriate minutes Setting the On/Off TimerSetting the Sleep Timer When finished, pressPress the Sleep button on the remote control Choosing a Multi-Channel Sound MTS Soundtrack Sound FeaturesPress VOL + to select On Press Menu twice to exit SurroundPress CH to highlight Mode Viewing Closed CaptionsPress VOL+ to open Caption menu Changing the Size of the PIP Window Selecting a Signal Source External A/V for PIPViewing Picture-in-Picture Activating Picture-in-PictureSwapping the Contents of the PIP image and Main image Changing the Location Rotating the PIP WindowChanging the PIP Channel Ready window will be displayed Enjoying GamesViewing the Demonstration Chapter Five Identifying ProblemsCleaning and Maintaining Your TV Using Your TV in Another CountrySpecifications