Samsung CL-29A5P, CL-29A5W, CL-29A6P, CL-29A6W, CL-29A7P, CL-29A7W, CL-29M6P, CL-29M6W, CL-34M9P

Page 48

S P E C I A L F E AT U R E S

5

Press VOL + to select “On/Off.”

Press CH ▲ (or CH ▼) to turn the on-timer “On.” (Repeatedly pressing CH ▲ or CH ▼ will alternate between on and off.)

6

When finished, press

VOL +.

7

To set the Off time, press CH ▼ to select “Off time.”

Press VOL + and set the hours and minutes. (Follow the same proce- dure as in steps 1~6 above.)

To deactivate the “On time,”

select “Off” during this step.

If no function buttons

(including remote control buttons or front panel buttons) are operated for three hours after the TV is turned on by “On time”, the TV will be automatically turned off.

8

When finished setting the timer, press MENU three times to exit.

Setting the Sleep Timer

The sleep timer automatically shuts off the TV after a preset time (from 10 to 180 minutes).

1

Press the SLEEP button on the remote control.

2

Press SLEEP repeatedly until the appropriate time interval appears (any of the preset values from “Off” to “180”).

After about 5 seconds, the sleep

display will disappear from the screen, and the time interval will be set.

4.11 CHAPTER FOUR: SPECIAL FEATURES

Image 48
Contents AA68-01186CENG ImporterRisk of Electric Shock N O T Open Thank You for Choosing Samsung Example Antenna Grounding Installation Your New TVOperation Special Features TroubleshootingList of Features Chapter OneFamiliarizing Yourself with The TV Side Panel Jacks Audio Input jacks Video Input jack´ Video Input jack ¨ Headphone jack Rear Panel Jacks Video Input jack ¨ Super Video Input jackDVD Video Input jacks AUDIO-VIDEO Monitor Output jacksRemote Control ´ Number buttons+100 SizeRemote Control ˜ VCR controls PIP ControlsPress to play the tape Press to fast forward a tapeConnecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin LeadsConnecting Cable TV Antennas with 75-ohm Round LeadsSeparate VHF and UHF Antennas Cable without a Cable BoxConnecting to a Cable Box that Descrambles All Channels Connecting to a Cable Box that Descrambles Some ChannelsConnect this cable to a two-way splitter Connecting a VCR Unplug the cable or antenna from the back of the TVInstall AT I O N Make sure the jacks you are using are underneath the number Connecting an S-VHS VCRConnecting a DVD Player Connecting a Second VCR to Record from the TVConnecting a Camcorder Installing Batteries in the Remote Control Plug & Play Feature Press PowerTurning the TV On and Off If you want to reset this feature Press Menu buttonViewing the Menus and On-Screen Displays Viewing the MenusViewing the Display Selecting a Menu Language Press Menu to display the menuSelecting the Video Signal-source Memorizing the ChannelsStoring Channels in Memory Automatic Method Press MENU, then press CH twice to select ChannelAdding and Erasing Channels Manual Method Press MENU, then pess CH twice to select ChannelPress CH or CH to select Add/Erase Press VOL+ Press Menu Press CH or CH to select SelectAdjusting the Volume Changing ChannelsLabeling the Channels Z,*, blank,0,1,...9Setting the Clock Press the Menu button to display the on-screen menuPress the CH or CH button to select the correct minutes Customizing the Picture Press Menu to display menuPress Menu four times to exit Using Automatic Picture Settings Customizing the Sound Using Automatic Sound Settings Setting The On/Off Melody VOL+Viewing a VCR or Camcorder Tape Customizing Your Remote Control Setting Up Your Remote Control to Operate Your VCRTurn off your VCR On your Samsung remote control, press SET VCR Codes Setting Up Your Remote Control to Operate Your Cable Box Cable BoxCodes Fine Tuning Channels Digital Noise Reduction LNA Low Noise Amplifier Press the Menu button to display the menuTilt Changing the Screen Size Using the R.Surf Setting the On/Off Timer Press CH or CH to select the appropriate minutesSetting the Sleep Timer When finished, pressPress the Sleep button on the remote control Sound Features Choosing a Multi-Channel Sound MTS SoundtrackSurround Press VOL + to select On Press Menu twice to exitPress CH to highlight Mode Viewing Closed CaptionsPress VOL+ to open Caption menu Selecting a Signal Source External A/V for PIP Viewing Picture-in-PictureActivating Picture-in-Picture Changing the Size of the PIP WindowSwapping the Contents of the PIP image and Main image Changing the Location Rotating the PIP WindowChanging the PIP Channel Enjoying Games Ready window will be displayedViewing the Demonstration Identifying Problems Chapter FiveCleaning and Maintaining Your TV Using Your TV in Another CountrySpecifications