Samsung HPN5039 Connecting VHF and UHF Antennas, Connecting Cable TV, Cable without a Cable Box

Page 11

Connecting VHF and UHF Antennas

Antennas with 75-ohm Round Leads

If your antenna looks like this: it has 75-ohm round leads.

Plug the antenna lead into the VHF/UHF terminal

1 on the PDP.

Use the Antenna Cable, an accessory included in the product package.

Connecting Cable TV

You can connect different cable systems to your PDP, including cable without a cable box, and cable with a cable box that descrambles some or all channels.

Cable without a Cable Box

Plug the incoming cable into the VHF/UHF terminal on

1 the PDP.

Use the Antenna Cable, an accessory included in the product package.

Cable with a Cable Box that Descrambles All Channels.

Find the cable connected to the ANTENNA OUT

1 terminal on your cable box. This terminal might be labeled "ANT OUT", "VHF OUT", or simply "OUT".

Connect the cable to the VHF/UHF terminal on the

2 PDP.

Use the Antenna Cable, an accessory included in the product package.

20

Cable with a Cable Box that Descrambles Some (But Not All) Channels

To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial cables (which you can buy from your Samsung dealer or any electronics store).

Find and disconnect the cable that is con-

1 nected to the ANTENNA IN terminal of your cable box.

This terminal might be labeled "ANT IN", "VHF IN", or simply, "IN". Connect this cable to a two-way splitter.

Connect a coaxial cable between an OUT-

2 PUT terminal of the splitter and the IN termi- nal of the cable box.

Connect a coaxial cable between the

3 ANTENNA OUT terminal of the cable box and the B-IN terminal of the A/B switch.

Connect a coaxial cable between the

4 ANTENNA OUT terminal of the cable box and the B-IN terminal of the A/B switch.

Connect the last coaxial cable between the

5 OUT terminal of the RF (A/B) switch and the VHF/UHF terminal on the PDP.

After you've made this connection, set the A/B switch to the "A" position for normal viewing.

Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch to "B", you will need to tune your Set-Top Box to the cable box's output channel, which is usually channel 3 or 4.)

21

Image 11

Contents Owner’s Instructions Thank You for Choosing Samsung Important Safety InformationUser Instructions FCC InformationUser Instructions Table of ContentsGeneral Information Your New Plasma Display Panel Remote Control Buttons Wall attachment panel Wall Installation InstructionsInstallation Notes PDP panel Wall How to Adjust Mounting AngleFactory default Changeing the angleConnections Cable without a Cable Box Connecting VHF and UHF AntennasConnecting Cable TV Antennas with 75-ohm Round LeadsCapability of 10 watts minimum impedance 8 ohm Connecting SpeakersViewing camcorder tapes Connecting a VCRConnecting a Camcorder Connecting a VCR to the Video or S-Video/Audio jackTo Watch DTV Playing DVDWatching DTV To Play DVDOperation Displaying Status Information Turning the PDP On and OffViewing the Menus and Displays Viewing the MenusMemorizing the Channels Selecting the Video Signal-sourceTo View Memorized Channel PIP Mode Changing Channels Setting Up Your Remote ControlAdjusting the Volume Using MuteVCR Codes Cable Box Codes DVD Codes Remote Control CodesPicture Control Press the Menu button to exit Using Automatic Picture SettingsCustomizing the Picture Press the Menu button, then press the Enter ButtonDNIe Digital Natural Image engine Selecting the Color TonePress the UP or Down button to select Source Viewing the Picture-in-PictureSelecting the PIP Screen Changing the Size of the PIP Window STD, HRD or IRC Changing the Location of the PIP ImageChanging the Screen Size Sound Control Customizing the Sound Using Automatic Sound Settings Press the Left or Right button to select Mono Stereo or SAP VolumeButton to select Sound, then press the Enter Press the UP or Down button to select AutoUsing a Subwoofer Using Dolby VirtualChannel Control LNA Low Noise Amplifier Fine Tuning ChannelsConnecting a PC and Operation To watch the PC screen Connecting to a PCPin Configuration Setting up Your PDP Plug and Play85.008 43.269 How to Set up Your PC Software Windows onlyColor Adjust will appear on the screen Adjusting the PC ScreenAdjusting the R.G.B Custom. When Custom is selected, the wordAppear Vertical, horizontal frequencies and resolutionChanging the Size of the Image Information Tion, then press the Enter buttonCoarse Adjustment Picture Quality AdjustmentPicture Automatic Adjustment Remove picture noise on the screen by pressing Time SettingFine Tuning Fine Press the UP or Down button to select Sleep Setting the Clock Setting the Sleep TimerButton to select Function, then press the Enter Setting the On/Off Timer Setting the TimersFunction Description Setting the Preferred Channel and Volume LevelSelecting a Menu Language Viewing Closed Captions Digital Noise Reduction Setting Auto Power OffPower Off How to Enable/Disable the V-Chip Using the V-ChipHow to Set up Restrictions Using the TV guidelines Mpaa Rating Appendix Selecting the Film ModeTroubleshooting Care and Maintenance Specifications Memo