Samsung HPN5039, HPN6339 manual Connecting a VCR, Connecting a Camcorder, Viewing camcorder tapes

Page 13

Connecting a VCR

Connecting a VCR to the Video or S-Video/Audio jack

PDP				VCR

Power Plug

Ferrite Cores(HPN5039)	Audio Cable

S-Video Cable

Video Cable

How to Connect

Connect the Video/Audio cables between the AUDIO(L/R)/VIDEO jacks on the PDP and AUDIO/VIDEO OUT jacks on the VCR. (Note: For better video, you can use an S-Video cable.)

Videotape Playback:

1.Turn on your PDP, and press the TV/VIDEO button on the remote control.

2.Press the UP or DOWN button to select “Video” or “S-Video”, then press the ENTER button.

3.Turn on your VCR, insert a videotape and press the play button.

Ferrite Cores (HPN5039)

The ferrite cores are used to attenuate undesired signals. When connecting the audio cable (PC, DVI, S-Video, Video), attach one of these ferrite cores to the cable near the connector.

When you connect the audio cable (PC, DVI, S-Video, Video, Component1, Component2) to the connectors, bind the ferrite core around the cable to secure it.

24

Connecting a Camcorder

Viewing camcorder tapes

Camcorder

PDP

Power Plug

Video Cable

Ferrite Cores(HPN5039)

Audio Cable

How to Connect

Connect a Video/Audio cable between the AUDIO(L/R)/VIDEO jacks on the PDP and the VIDEO/AUDIO OUTPUT jacks on the camcorder.

Viewing Tapes

1.Turn on your PDP, and press the TV/VIDEO button on the remote control.

2.Press the UP or DOWN button to select the “Video”, then press the ENTER button.

3.Turn on your camcorder and set it to Video Mode. (For details, refer to your camcorder owner's instructions.)

4.Set the IN/OUT switch on your camcorder to OUT.

5.Insert the tape into the camcorder and press the Play button.

25

Image 13

Contents Owner’s Instructions Thank You for Choosing Samsung Important Safety InformationUser Instructions FCC InformationUser Instructions Table of ContentsGeneral Information Your New Plasma Display Panel Remote Control Buttons Installation Notes Wall Installation InstructionsWall attachment panel Factory default How to Adjust Mounting AngleChangeing the angle PDP panel WallConnections Connecting Cable TV Connecting VHF and UHF AntennasAntennas with 75-ohm Round Leads Cable without a Cable BoxCapability of 10 watts minimum impedance 8 ohm Connecting SpeakersConnecting a Camcorder Connecting a VCRConnecting a VCR to the Video or S-Video/Audio jack Viewing camcorder tapesWatching DTV Playing DVDTo Play DVD To Watch DTVOperation Viewing the Menus and Displays Turning the PDP On and OffViewing the Menus Displaying Status InformationMemorizing the Channels Selecting the Video Signal-sourceTo View Memorized Channel PIP Mode Adjusting the Volume Setting Up Your Remote ControlUsing Mute Changing ChannelsPicture Control Remote Control CodesVCR Codes Cable Box Codes DVD Codes Customizing the Picture Using Automatic Picture SettingsPress the Menu button, then press the Enter Button Press the Menu button to exitDNIe Digital Natural Image engine Selecting the Color ToneSelecting the PIP Screen Viewing the Picture-in-PicturePress the UP or Down button to select Source Changing the Size of the PIP Window STD, HRD or IRC Changing the Location of the PIP ImageChanging the Screen Size Sound Control Customizing the Sound Using Automatic Sound Settings Button to select Sound, then press the Enter VolumePress the UP or Down button to select Auto Press the Left or Right button to select Mono Stereo or SAPUsing a Subwoofer Using Dolby VirtualChannel Control LNA Low Noise Amplifier Fine Tuning ChannelsConnecting a PC and Operation Pin Configuration Connecting to a PCSetting up Your PDP Plug and Play To watch the PC screen85.008 43.269 How to Set up Your PC Software Windows onlyAdjusting the R.G.B Adjusting the PC ScreenCustom. When Custom is selected, the word Color Adjust will appear on the screenChanging the Size of the Image Information Vertical, horizontal frequencies and resolutionTion, then press the Enter button AppearPicture Automatic Adjustment Picture Quality AdjustmentCoarse Adjustment Fine Tuning Fine Time SettingRemove picture noise on the screen by pressing Button to select Function, then press the Enter Setting the Clock Setting the Sleep TimerPress the UP or Down button to select Sleep Setting the On/Off Timer Setting the TimersFunction Description Setting the Preferred Channel and Volume LevelSelecting a Menu Language Viewing Closed Captions Power Off Setting Auto Power OffDigital Noise Reduction How to Enable/Disable the V-Chip Using the V-ChipHow to Set up Restrictions Using the TV guidelines Mpaa Rating Appendix Selecting the Film ModeTroubleshooting Care and Maintenance Specifications Memo