Samsung HPN5039, HPN6339 manual Troubleshooting Care and Maintenance

Page 49

Troubleshooting

Care and Maintenance

Before you call a service technician, please scan this list of problems and possible solutions. It may save you time and money.

Problem		Possible Solution

Poor picture.		Check all wire connections.

Your Remote control does not		Press the “Mode” button to put your remote control in the “TV”
operate the PDP.		mode.

The PDP won’t turn on.		Check if the power plug is connected.

There is no screen image.		Check to see that both the PDP and the source are plugged in
		and turned on.

The image is too light or		Adjust the Brightness or Contrast settings.
too dark.

The image is too large or		Adjust the Size settings.
too small.

With proper care, your PDP will give you many years of service. Please follow these guidelines to get the maximum performance from your PDP.

Identifying Problems

•Do not put the PDP near extremely hot, cold, humid or dusty places.

•Do not put the PDP near appliances that create magnetic fields.

•Keep the ventilation openings clear.

•Do not place the PDP on a rough and slanted surface, such as cloth or paper.

Liquids

• Do not place liquids near or on the PDP.

Cabinet

•Never open the cabinet or touch the parts inside.

•Wipe your PDP with a clean, dry cloth. Never use water, cleaning fluids, wax, or chemicals.

•Do not put heavy objects on top of the cabinet.

Temperature

•If your PDP is suddenly moved from a cold to a warm place, unplug the power cord for at least two hours so that moisture that may have formed inside the unit can dry completely.

96

97

Image 49

Contents Owner’s Instructions Thank You for Choosing Samsung Important Safety InformationUser Instructions FCC InformationUser Instructions Table of ContentsGeneral Information Your New Plasma Display Panel Remote Control Buttons Installation Notes Wall Installation InstructionsWall attachment panel Factory default How to Adjust Mounting AngleChangeing the angle PDP panel WallConnections Connecting Cable TV Connecting VHF and UHF AntennasAntennas with 75-ohm Round Leads Cable without a Cable BoxCapability of 10 watts minimum impedance 8 ohm Connecting SpeakersConnecting a Camcorder Connecting a VCRConnecting a VCR to the Video or S-Video/Audio jack Viewing camcorder tapesWatching DTV Playing DVDTo Play DVD To Watch DTVOperation Viewing the Menus and Displays Turning the PDP On and OffViewing the Menus Displaying Status InformationMemorizing the Channels Selecting the Video Signal-sourceTo View Memorized Channel PIP Mode Adjusting the Volume Setting Up Your Remote ControlUsing Mute Changing ChannelsPicture Control Remote Control CodesVCR Codes Cable Box Codes DVD Codes Customizing the Picture Using Automatic Picture SettingsPress the Menu button, then press the Enter Button Press the Menu button to exitDNIe Digital Natural Image engine Selecting the Color ToneSelecting the PIP Screen Viewing the Picture-in-PicturePress the UP or Down button to select Source Changing the Size of the PIP Window STD, HRD or IRC Changing the Location of the PIP ImageChanging the Screen Size Sound Control Customizing the Sound Using Automatic Sound Settings Button to select Sound, then press the Enter VolumePress the UP or Down button to select Auto Press the Left or Right button to select Mono Stereo or SAPUsing a Subwoofer Using Dolby VirtualChannel Control LNA Low Noise Amplifier Fine Tuning ChannelsConnecting a PC and Operation Pin Configuration Connecting to a PCSetting up Your PDP Plug and Play To watch the PC screen85.008 43.269 How to Set up Your PC Software Windows onlyAdjusting the R.G.B Adjusting the PC ScreenCustom. When Custom is selected, the word Color Adjust will appear on the screenChanging the Size of the Image Information Vertical, horizontal frequencies and resolutionTion, then press the Enter button AppearPicture Automatic Adjustment Picture Quality AdjustmentCoarse Adjustment Fine Tuning Fine Time SettingRemove picture noise on the screen by pressing Button to select Function, then press the Enter Setting the Clock Setting the Sleep TimerPress the UP or Down button to select Sleep Setting the On/Off Timer Setting the TimersFunction Description Setting the Preferred Channel and Volume LevelSelecting a Menu Language Viewing Closed Captions Power Off Setting Auto Power OffDigital Noise Reduction How to Enable/Disable the V-Chip Using the V-ChipHow to Set up Restrictions Using the TV guidelines Mpaa Rating Appendix Selecting the Film ModeTroubleshooting Care and Maintenance Specifications Memo