Volume Lock
After you program your TV code into your remote control, it will automatically control the TV’s volume while operating in the TV, VCR, or CBL modes. You can also program the remote control so that you can control the volume through the HCT or TV/VCR combination while operating in TV, VCR, or CBL modes. We call this Volume Lock.
Note: Volume Lock programming will remain active even if batteries are removed for an extended period of time.
To switch your volume control to a device other than your TV, follow the steps below.
1. Hold down
2. Press 9 9 3 .
3.Press the appropriate device mode button ( CBL or VCR ). The red light blinks twice. Your volume control is now locked to your selected device mode.
Device Button Result
Home CBL Terminal
TV/VCR VCR combination
Your remote control will now control the volume through your home terminal.
Your remote control will now control the volume through your TV/VCR combination.
Important! If you have a TV/VCR combination unit, you need to enter a TV code to control volume. Once you enter the TV code, the volume control will work in any mode. In most cases the TV code is the same as the VCR or TV/VCR combination code already entered, but for the codes noted in the table on page 15, a different TV code is required for volume control.
Note: Your AllTouch Remote Control automatically controls only the volume of your Aux device (CD Player) while in the AUX mode. You cannot lock the volume to the AUX mode.
14 | 573497 Rev B |