Scientific Atlanta 573480 manual Setting up the remote control to operate other devices

Setting up the remote control to operate other devices

You can use the AUX button on your AllTouch Remote Control to set up your:

•Cable digital audio receiver

•CD player

•Home automation device

To make the remote control work with other devices, follow this procedure.

1.Find the code for your brand of device in the back of this guide. You may find more than one code for your particular brand. Start with the first choice.

2.Press and release AUX , then hold down SET-UPuntil the red light blinks twice.

Note: You may need to wait a few seconds for the red light to blink twice.

3.Enter your 3-digit device code–the red light should blink twice again. (If the red light does not blink twice, return to step 1 and try again.)

AUX

	AUX	TV
VCR	POWER		CBL
MENU			INFO

E	S
	L
ID	E
	E
U	C
G	T
PPV	FAV
MUTE	L
	T
	AS
V	C
O
L	H

ABC

1 2 3

4.Point your AllTouch Remote Control at your device and press POWER .

5.Did your device turn off (or on)?

4 5 6

7 8 9

PREV. DAY NEXT DAY

0

REW PLAY FF

PAUSE STOP REC

SET-UP BYPASS

• If yes, you are finished setting up your device.
Write your code on page 31.
	SET-UP
• If no, go to step 6.
		T6056

Note: You may want to try several functions of your device to verify operation. Button operation (for example, CH ▲▼ , LAST, INFO, etc.) will depend on the AUX device programmed.

6.If your device did not respond, repeat steps 2 through 5 trying all of the codes (one at a time) under your brand.

7.If your device still did not respond, turn to All Search on page 10 and follow the steps.

8 573497 Rev B