Troubleshooting
Refer to the following table for solutions if you have trouble operating your AllTouch Remote Control.
Problem | Possible Cause |
| Check and Correct | |
|
|
| ||
The red light | •The battery | Replace the batteries. Use | ||
does not blink | voltage is low. | two AA alakaline batteries. | ||
when you press | •The batteries are | Check that the batteries’ | ||
POWER . | inserted incorrectly. | plus (+) and minus | ||
|
| match the illustration inside the | ||
|
| battery compartment. | ||
|
|
|
| |
The remote | You may have the | Press: |
| |
control does not | remote control in | • VCR | for VCR | |
work properly or | the wrong mode. | • | AUX | for auxiliary device |
home terminal/ |
| • | TV | for TV |
HCT functions |
| • | CBL | for cable |
do not work. |
|
|
|
|
| You may have used | Follow these steps to program | ||
| an incorrect code to | your remote control with the | ||
| program the remote | correct code: | ||
| control. | 1. | Try all the codes listed | |
|
|
| under the brand of your | |
|
|
| device. | |
|
| 2. Try All Search and be sure | ||
|
|
| to go slowly. (See page 10.) | |
|
| Important! Be sure to point | ||
|
| your AllTouch Remote Control | ||
|
| directly at your device when you | ||
|
| press | POWER or PLAY . | |
|
|
|
|
|
18 | 573497 Rev B |