Toshiba 42HM66 manual Controls and Connections, Back panel connections

4

English

Controls and Connections

Back panel connections

To view a source connected to one of the inputs on the back panel, press INPUT on the side panel to select the applicable input: TV, AV1, S-Video, ColorStream HD-1, ColorStream HD-2, or HDMI.

Note:

•The TV’s INPUT key is on the side panel (not the front).

•For details on the video output requirements of your other devices, refer to the owner’s manuals for those devices.

•Cables are not supplied.

Component video DVD player	The unauthorized recording,
connected to
COLOR STREAM HD-1 IN*	use, distribution, or revision
	o f t e l e v i s i o n p r o g r a m s ,
	video tapes, DVDs, and other
	materials is prohibited under the
	Copyright Laws of the United
	States and other countries, and
	may subject you to civil and/or
	criminal liability.

			}
		Connect EITHER
		S-Video OR
		standard video
		cable. Do not
		connect both types
		of video cable
		at the same time.
	Antenna, cable box,
	or satellite dish	S-Video device	HDMI or DVI device
	connected to	connected to	connected to
	ANT IN	VIDEO-1 IN	HDMI IN*
____________
*	You can connect a component video-compatible device to either set of ColorStream® inputs
	on the TV back panel—ColorStream HD-1 or ColorStream HD-2.
** For proper operation, it is recommended that you use as short an HDMI cable as possible (shorter than
	16.4 ft (5m). HDMI cable transfers both video and audio; therefore, separate analog audio cables are			Audio system
	not required. Some CDVs (video CDs) may not output digital audio signals, in which case you may hear
				connected to
	sound by connecting analog audio cables. Connecting a DVI device requires an HDMI-to-DVI converter
				AUDIO OUT
	cable and analog audio cables. Because this is an evolving technology, it is possible that some devices
	may not operate properly with the TV.

+'0,WKH+'0,ORJRDQG+LJK'H¿QLWLRQ0XOWLPHGLD,QWHUIDFHDUHWUDGHPDUNVRUUHJLVWHUHGWUDGHPDUNVRI+'0,/LFHQVLQJ//&