![](/images/new-backgrounds/1215136/21513627x1.webp)
5Using the Remote Control
English
Programming the TV's universal remote control to operate your other devices
You can program the TV's remote control to operate up to four different
The "TV" mode button on the remote control (see item 6 on page 12) is already programmed to operate your TV. (The TV's device program code is 11369).
To program the rem ote controlto operate anotherdevice:
1.Find the code for the other device in the "Device program codes" table on pages
2.Manually turn on the device (using the POWER button on the device and not the remote control).
3.Press the mode button you want to program on the remote control (TV, VCR, CBL, and AUX).
3UHVVDQGKROG6(7RQWKHUHPRWHFRQWUROXQWLOWKH/('ÀDVKHVWZLFH
5.Use the Channel Number buttons to enter the code for your device.
,IWKH/('GRHVQRWÀDVKWZLFHUHSHDWVWHSV±XVLQJDQRWKHUFRGH if there are other codes listed for your device. (If there are no other codes listed for your device, you will not be able to program the TV remote control to operate your other device and will need to use the device's remote control.)
•,IWKHFRGHLVDFFHSWHGWKH/('ÀDVKHVWZLFHDIWHUWKHODVWGLJLWLV
entered.
6.Point the remote control at the device and press POWER on the remote control. If the correct code has been programmed, the device will turn off. If the device does not respond, repeat steps
,IWKHFRGHLVDFFHSWHGWKH/('ÀDVKHVWZLFHDIWHUWKHODVWGLJLWLV entered.
7.Repeat these steps for other devices you want to operate using the TV remote control.
Note:
•Even after the TV remote control is programmed, it may not operate certain features on your other device. If this happens and you wish to use those features, you will need to use the device’s original remote control.
•In some cases you may not be able to operate your device with the TV remote control. Your other device may use a code that is not recognized by the TV remote control. If this happens, use the device’s remote control.
14 | Copyright © 2006 TOSHIBA CORPORATION. All rights reserved. |
|