![](/images/new-backgrounds/1215136/21513661x1.webp)
Appendix 8
Troubleshooting (continued)
OSD messages
1.AUTO SCAN REQUIRED
Need to search TV channel message.
2.MTS
Display TV audio system message.
3.CLOSED CAPTION Display CC system message.
LED indications
| POWER |
| LED |
LAMP | LAMP |
| LED |
4.NO SIGNAL
Display the main picture no signal input message.
5.SLEEP TIMER
Display sleep timer message.
6.SLEEP TIMER COUNTER
Display sleep timer counter message.
7.NO FUNCTION
If you press the remote control keys for the "Audio", "VGA", "AV mode", "Zoom", "PIP View", "FAV1", "FAV2", this message will be displayed "NO FUNCTION". These functions are not available on this TV.
There are two status LEDs on the front of your Micro Chip Display Projection DLP TV.
You can see the table below which display's the LED status and their meanings.
English
Normal Operation
State | Power LED | Lamp LED | Status Description |
AC off | Not lit | Not lit | AC power not connected |
|
|
|
|
DC off when Quick | Flashing orange | Not lit | 1. Low Power Shutdown (LPS) mode. |
RestartTM seature is set |
|
| 2. After several minutes, the TV will turn off all power |
to Yes |
|
| and go to standby model. |
|
|
|
|
DC off when Quick | Orange | Flashing | Lamp cooling several seconds. |
RestartTM seature is set |
|
|
|
to No |
|
|
|
|
|
|
|
Standby mode | Orange | Not lit | AC plug in, DC power off. |
|
|
|
|
Green | Flashing | Lamp ignition. | |
|
|
|
|
Operation mode | Green | Not lit | Display is active. |
|
|
|
|
Attempting to light | Green blinking | Flashing | ,IWKHODPSXQLWGRHVQRWOLJKWWKH79ZLOOWU\WROLJKWLWDJDLQ |
lamp unit |
|
| WKLVSURFHVVZLOOUHSHDWXSWR¿YHWLPHV,ILWLVXQVXFFHVVIXO |
|
|
| DIWHUWKH¿IWKWU\DQHUURUPHVVDJHZLOODSSHDURQVFUHHQ |
Error Codes
State | Power LED | Lamp LED | Status Description |
Error1: | LEDG: Flash | Hi (OFF) | Any FAN (1 or 2 or 3) failure or disconnected. |
2 Green, 1 Orange | LEDO: Flash |
| After the fan detects error 5 sec, the LED shows |
|
|
| "ERROR1" message. |
|
|
|
|
Error2: | LEDG: Flash | Flash | Lamp ignition failure, Lamp failure, blaster error, Lamp |
3 Green, 2 Orange | LEDO: Flash |
| shut off unexpectedly. |
|
|
| (The system will shut down main power go to standy |
|
|
| mode.) |
|
|
|
|
Error3: | LEDG: Flash | Hi (OFF) | DLP hardware error. |
5 Green, 2 Orange | LEDO: Flash |
|
|
Copyright © 2006 TOSHIBA CORPORATION. All rights reserved. | 31 |