Installing the remote control batteries
1.Remove the battery cover from the back of the remote control.
2.Insert two "AA" size batteries, making sure to match the + and – signs on the batteries with the + and – symbols inside the battery compartment.
3.Reinsert the battery cover on the back of the remote control until the tab snaps.
Caution:
1HYHUWKURZEDWWHULHVLQWRD¿UH
Note:
•Be sure to use "AA" size batteries.
•Dispose of batteries in a designated disposal area.
•Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations.
•If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with new ones.
•When necessary to replace batteries in the remote control, always replace both batteries with new ones. Never mix battery types or use and and used batteries in combination.
•Always remove the batteries from the remote control if they are dead or if the remote control is not to be used for an extended period of time. This will prevent acid from leaking into the battery compartment.
Using the remote control 5
English
Remote control effective range
The effective range of the remote control's IR (infrared) sensor is illustrated at right.
For optimum performance, aim the remote control directly at the TV's IR sensor, and make sure there are no obstructions between the remote control and the TV.
Note: Avoid placing the remote control's IR sensor in bright light, which may reduce its receiving sensitivity.
16.4 ft(5m )
Copyright © 2006 TOSHIBA CORPORATION. All rights reserved. | 11 |