Important Safeguards (continued) | (continued) |
|
|
Cleaning
Unplug the set from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the set.
If a snapping or popping
sound from a projection
TV set is continuous or
frequent while the
projection TV is operating, unplug the
projection TV and consult
your dealer or service technician.
It is normal for some projection TV sets to make occasional snapping or popping sounds, particularly when being turned on or off.
Installation
Water and Moisture
Do not use
operated sets near
water— for example, near
a bathtub, washbowl,
kitchen sink, or laundry
tub, in a wet basement or
near a swimming pool,
4 
etc.
Accessories
Do not place the set on an
unstable cart, stand, table
or shelf. The set may fall,
causing serious injury to a
child or an adult, and serious damage to the set.
Use only a cart or stand recommended by the manufacturer for the specific model of projection TV.
An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
Ventilation
The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of the set, and to protect it from overheating, these slots and openings must never be blocked or covered.
- Never cover the slots and openings with a cloth or other materials.
-Never block the slots and openings by placing the set on a bed, sofa, rug or other similar surface.
-Never place the set in a confined space, such as a bookcase, or
-Do not place the set near or over a radiator or heat register, or where it is exposed to direct sunlight.
Power-Cord Protection
Do not allow anything to rest on or roll over the power cord, and do not place the set where the power cord is subject to wear or abuse.