01COV.book Page 19 Tuesday, July 30, 2002 3:46 PM
Installing and Connecting the Projection TV
Connecting a VCR and Cable
Use this hookup if:
❑You have cable TV that does not require a cable box.
Disconnect all power sources before making any connections.
1
2 Using a coaxial cable, connect the VCR’s OUT jack to the projection TV’s VHF/UHF jack.
3 Using AUDIO and S VIDEO cables, connect the VCR’s Audio and S Video OUT jacks to the projection TV’s AUDIO and S VIDEO IN jacks.
Rear of Projection TV
Coaxial cable
Installing and Connecting the Projection TV
S VIDEO
VIDEO (yellow)
VCR
Cable
✍If your VCR is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable.
19
Model |