01COV.book Page 41 Tuesday, July 30, 2002 3:46 PM
Using the Features
Using Twin View™
Activating Twin Pictures
Activating the Picture
Twin View enables you to watch two programs at the same time. You can also change the size of both the left and right pictures.
To display twin pictures
1 Make sure your projection TV is tuned to a working channel.
2 Press 
.
To cancel twin pictures
❑Press 
again (or press 
).
Although two pictures appear on the screen at the same time, only one picture is active. For an active picture, you can:
❑Change channels.
❑Adjust the volume.
❑Switch the input sources from VHF/UHF to cable by pressing ANT or TV/VIDEO to switch the video input.
When the picture on the right is activated, the input sources cannot be switched to VIDEO 5, 6, 7, or AUX by pressing ANT.
❑Change the picture size by pressing the joystick up or down.
To activate the right picture
❑Move the joystick to the right.
To activate the left picture
❑Move the joystick to the left.
(Continued)
Using the Features
41
Model |