Sony KP-46WT500 manual Qd Power, Buttons, Qf Function, Qg TV/VIDEO, Qh 0 9, Qk Menu, Ql CH +, Drc

01COV.book Page 35 Tuesday, July 30, 2002 3:46 PM

	Using the Features
Button	Description
qd POWER	Turn on and off the projection TV and other audio/video
buttons	equipment you have programmed into the remote control.
(GREEN)	For instructions, see “Programming the Remote Control”
	on page 68.
qf FUNCTION	Select the equipment (TV, SAT/CABLE) that you want to
buttons	operate. The indicator lights up momentarily when pushed
	to show which device the remote control is operating.
qg TV/VIDEO	Cycles through the video equipment connected to your
	projection TV’s video inputs: TV, VIDEO 1, VIDEO 2,
	VIDEO 3, VIDEO 4, VIDEO 5, VIDEO 6 and VIDEO 7.
qh 0 – 9 and	Press 0 - 9 to select a channel, the channel changes after 2
ENTER	seconds. Press ENTER to select immediately.
qj	Turns on/off Twin View. For details, see “Using Twin
	View™” on page 41.
GUIDE	Displays the program guide of your satellite.
qk MENU	Press to display the projection TV on-screen menu. Press
	again to exit from the menu.
ql CH +/–	Scan through channels.
w; DRC/	Press repeatedly to step through the available high-
CINEMOTION	resolution picture modes: Interlaced, Progressive and
	CineMotion. For details, see “Using the Video Menu” on
	page 49.
wa WIDE MODE	Press to step through the wide screen modes: Wide Zoom,
	Normal, Full and Zoom. For details, see “Using Wide
	Screen Mode” on page 47.

Using the Features

zTo scan rapidly through the channels, press and hold down CH+ or CH–.

35

Model name1[KP-46WT500] Model name2[KP-51WS500] Model name3[KP-57WS500] Model name4[KP-65WS500]

[4-088-847-12]