Samsung HTF5500 Installing the Speakers on the Tallboy Stand, Connecting The Speakers, HT-F4530

HT-F4530

(L) (R)

FRONTSTAND

SCREW (5x20): 8EA

SPEAKER CABLE CENTER

(L)(R)

STAND BASE SURROUND SUBWOOFER

03 Connections

Installing the Speakers on the Tallboy Stand

* HT-F4530 only - Front Speakers

1 Stand Base 2

1. Turn the Stand Base upside-down and connect it to the Stand.

2. Use the driver to combine the screws on the 3 marked holes.

Stand

3.Straighten a supplied speaker wire to the gravity direction and

put in the hole on the center of Stand Base.	3	4
4. Connect the upper Speaker to the assembled Stand.		Speaker

Stand

5.Insert a screw clockwise into the hole on the rear of the speaker

using a screwdriver.	5	6
And then connect a speaker cable.
6. This is the appearance after the speaker is installed.
Follow this steps to install other speaker.

Connecting The Speakers

1.Match each speaker cable bundle to the correct speaker by matching the color coded plug on each bundle to the colored sticker on the bottom of each speaker.

2.To attach speaker wire to each speaker:

a.Press down the red tab on the back of the speaker, insert the red wire, and then release the tab.

b.Press down the black tab on the back of the speaker, insert the black wire, and then release the tab.

3.Connect the speaker wire plugs from each speaker to the back of the product by matching the colors of the speaker plugs to the colors of the speaker jacks.

Black Red

English 13