Auto Upgrade Notification, Setting Up Dlna

Settings

3.Enter the product's model number into the search field. As you enter the model number, a drop down will display products that match the model number.

4.Left click your product's model number in the drop down list.

5.On the page that appears, scroll down to and then click Firmware Manuals & Downloads.

6.Click Firmware in the center of the page.

7.Click the ZIP icon in the File column on the right side of the page.

8.Click Send in the first pop-up that appears. Click OK in the second pop-up to download and save the firmware file to your PC.

9.Unzip the zip archive to your computer. You should have a single folder with the same name as the zip file.

10.Copy the folder to a USB flash drive.

11.Make sure no disc is inserted in the product, and then insert the USB flash drive into the USB port of the product.

12.In the product’s menu, go to Settings > Support > Software Upgrade.

13.Select By USB.

NOTES

There should be no disc in the product when you upgrade the software using the USB Host jack. Never turn the product off or on manually during the update process.

When the software upgrade is done, check the software details in the Software Upgrade menu.

Auto Upgrade Notification

If your product is connected to the network and you set Auto Upgrade Notification on, the product will notify you if a new software version is available with a pop-up message.

1.Turn on the product.

2.In the Software Upgrade menu, set Auto Upgrade Notification to On.

If there is a new software version available, the product will notify you with a pop-up message.

3.To upgrade the firmware, select Yes. The product turns off automatically, turns on, and then begins the upgrade.

4.The update progress popup will appear. When the update is complete, the product will turn off automatically again.

5.Press the POWER button to turn on the product.

NOTES

The update is complete when the product turns off after restarting. Press the POWER button to turn on the updated product for your use. Never turn the product on or off manually during the update process. Samsung Electronics takes no legal responsibility for a product malfunction caused by an unstable Internet connection or consumer negligence during software upgrade.

Setting Up DLNA

DLNA enables you to play music, video and photo files located in your PC using this product. To use DLNA, you must connect the product to your PC via the network (See page 14) and install the SAMSUNG PC Share Manager on the PC.

To Download the DLNA Software

To use DLNA with your PC, you must install DLNA software on your PC. You can download the PC software and get detailed instructions for using DLNA from the Samsung.com website.

1.Go to www.samsung.com.

2.Click SUPPORT at the top of the page.

3.Enter the product's model number into the search field. As you enter the model number, a drop down will display products that match the model number.

4.Left click your product's model number in the drop down list.

5.On the page that appears, scroll down to and then click Firmware Manuals & Downloads.

6.Click the Software tab.

7.On the software tab, click the EXE icon on the right side of the DLNA line.

8.In the first pop-up that appears, click Send. In the second pop-up, click Save File.

9.Find the DLNA install file on your disk, and then double click the file.

10.In the pop-up that appears, click Run, and then follow the directions that appear on your screen.

Download the DLNA Installation/Instruction manual from the same Software Tab by clicking the corresponding PDF file symbol in the File column on the right. The file, in PDF format, will download and open. Follow the directions to install and setup DLNA. You can view and/or save the file.

NOTES

To use DLNA with your smartphone, you need to connect your set & smartphone to the same router.

22 English