Pioneer BDP-V6000 Installation Procedure, 02  Specially shaped discs,  Condensation on discs

Page 16

02Specially shaped discs

Specially shaped discs (heart-shaped, hexagonal, etc.) cannot be used on this player. Never use such discs, as they will damage the player.

3 Mount the rack mount brackets.

Mount the rack mount brackets to the screw holes in the sides of the player using the screws removed from the player in step 2 (two screws on each side).

Condensation on discs

If the disc is moved suddenly from a cold place into a warm room (in winter, for example), water droplets (condensation) may form on the disc surface. Discs will not play properly if there is condensation on them. Carefully wipe off the water droplets from the disc surface before using the disc.

Extended use of recording discs

Playing a specific section of a recording disc (BD-R/RE, DVD-R/RW, etc.) continuously for extended periods of time may reduce performance of the recorded surface and make the disc unplayable. To avoid this, take measures so that no single specific section is played for extended periods of time, and replace the disc periodically.

Installation Procedure

1Disconnect all cords connected to the set (including the power cord).

Before starting, check that there is no disc in the set.

2Turn the set upside-down, and remove the screws on the sides of the set.

Remove the 2 screws from each side.

Caution

• When mounting, be sure to place the set on a stable surface, such as on a flat table, and raise the side of the set on which you are mounting the rack mount bracket by at least 10 mm.

Mounting the rack mount bracket without raising the set at least 10 mm could damage the set.

• When mounting the rack mount bracket, be sure to use the screws removed from the player. Using other screws could damage the set or result in the set

Screw holes

Screws removed from player

Rack mount bracket

•The rack mount brackets are different for the left (L) and right (R) sides. Check the L and R marks on the rack mount brackets and be sure to mount them on the correct side.

•When mounting, first tighten the two screws removed from the player to the extent that the rack mount bracket moves when a gentle force is applied, check that the rack mount bracket is properly attached, then tighten the screws securely.

16

falling.

En

Page 15 Page 17
Image 16
Page 15 Page 17
Contents
BDP-V6000 Information to User Risk of Electric Shock Do not OpenClass Laser Product POWER-CORD Caution We Want You Listening For a Lifetime To establish a safe levelOnce you have established a comfortable sound level Decibel Level ExampleContents What’s in the box Putting the batteries in the remote controlSoftware updating Types of discs/files that can be played Playable discsApplication format Disc type Logo DVD+R 3,4 Discs that cannot be played  About playback of unauthorized copies About audio formats  Playing BDsPlayable files Remote Control Part Names Functions Supported audio file formats  Playable file extensions Front Panel Front Panel Display Rear PanelPlace of installation  Do not place objects on top Do not obstruct the ventilation holes  Keep away from heatCleaning the pickup lens Turn the power off when not using the playerCleaning the player Moving the playerInstallation Procedure 02  Specially shaped discs Condensation on discs  Extended use of recording discsMount the underplate Mount the set on the rackSet Rack mount Screw holes * screws BracketAbout Hdmi Connecting using an Hdmi cable About the Hdmi High Speed Transmission  When connected to a DVI device About Kuro Link function To use the Kuro Link function  About Pqls functionConnecting a TV Connecting an AV receiver or amplifierConnecting video and audio cables Connectingcomponents to the USB portAbout USB external storage devices Connect the player’s video output directly to your TVConnecting the power cord Connecting the USB external storage deviceConnecting via an Ethernet hub Network connectionMaking settings using the Setup Navigator menu  If the Setup Navigator menu is not displayedSetting item Output terminal name Select and set the video and audio output terminalsOperating the TV with the player’s remote control TV Preset code list Manufacturer CodesUsing the Tools menu Switching the video output terminal to be viewed To change the setting of the selected item  To close the Tools menuSwitching the output video resolution  Press Output Resolution About the frame/field frequency and NTSC/PAL TV systems  About Film material04  About the output video resolution ResolutionOutput Video Hdmi OUT terminal ComponentPress  STANDBY/ON to turn on the power Playing discs or files If the disc menu is displayed Press  OPEN/CLOSE to open the disc tray and load the discSkipping content Switching the camera anglesSwitching the subtitles Forward and reverse scanningSwitching the audio and secondary audio Switching the secondary videoDisplaying the disc information  Turning the Secondary Audio offPlayback functions Disc/file type FunctionAudio Video FileUsing the Play Mode Playing a specific titleChapter or track Search Playing from a specific time Time Search To cancel Repeat Play  To cancel Random PlayPlaying repeatedly Repeat Play Playing in random order Random PlayDisc/file type Play Mode type Mark 1 BD Repeat PlayPlaying from the Home Media Gallery Playing discsPlaying image files  Closing the Home Media GalleryPlaying audio files Playing in the desired order HMG Playlist Rotating images  Adding tracks/files Deleting tracks/files from the HMG Playlist  Playing the HMG PlaylistSelect HMG Playlist Adjusting the video  When Memory1, 2 or 3 is selectedAdjusting the audio Adjusting the Audio DRC Closing the Video Adjust screen  About Pure CinemaAdjusting the audio delay Lip Sync Adjusting the amount of audio delay Closing the Channel Level screen  Closing the Lip Sync screenChanging the settings Operating the Initial Setup screen Closing the Initial Setup screen Setting Options ExplanationOptions Explanation Auto EnglishSubtitle LanguageOptionsExplanation  Changing the speaker setup  Adjusting the distance of the different speakers Setting the IP address  Setting the proxy server Testing the network connection  Displaying the network settings Changing to other language at language setting  Registering or Changing the password  Changing the Parental Lock level for viewing DVDs Changing the Age Restriction for viewing BD-ROMs  Changing the Country/Area code Setting the output terminals Restoring all the settings to the factory default settingsSoftware updating About the audio output settings AutoPage  Language Code Table Language Code Table and Country/Area Code Table Country/Area Code Table Operating the Advanced Setup screen  Closing the Advanced Setup screenPlaying titles/chapters in the registered order Playlist Creating playlist Deleting titles/chapters from the playlist  Deleting all titles/chapters from the playlistSelect and set Advanced Setup  Playlist Auto Start  On Playing the playlistSerial control specifications Serial interface specificationsConnection to a computer List of usable commands ArgumentsCommand mnemonics ArgumentsCommunications interface manual AddressLicenses libxml2OpenSSL zlib FreeType2libpng libjpglibupnp AVC/H.264No Warranty GNU Lesser General Public License Notice on GNU General Public License Do so, and all its terms and conditions for copyingProblem PlaybackCheck Remedy Is Ntsc on PAL TV properlyProblem Check Remedy Is TV Aspect Ratio properlyIs 43 Video Out properly Is DVD 169 Video OutComponent Video or Digital OUT terminalIs Hdmi Audio Out properly Audio Out to PCMPerform Individual/Shared Data Erase or Storage Format Perform Application Data EraseIs Hybrid Disc Playback Set Hybrid Disc Playback to DVD Is Hybrid Disc Playback Set Hybrid Disc Playback to CDBD-LIVE function connection to the Internet cannot be used NetworkCheck that this player and Ethernet hub or router with hub Others Glossary  Hdmi High-Definition Multimedia Interface Specifications Pioneer Corporation
Top Page Image Contents