Pioneer BDP-V6000 operating instructions Options Explanation

Page 43

Video Out

Setting

NTSC on PAL TV

Options

Explanation

07

On

Select this when a TV that only supports PAL is connected. The picture is

 

 

displayed correctly when playing a disc recorded with a frame/field rate other

 

 

than 50 Hz.

 

 

 

 

Off

Select this when connected to an NTSC-compatible TV.

 

•Many recent PAL TVs support the input of NTSC signals, in which case this can be set to Off. Also check your TV’s operating instructions.

Audio Out

Dolby Digital Out

*Only valid for the DIGITAL OUT terminal.

Dolby Digital 1

Dolby Digital audio signals are output. With BD-ROMs, the secondary audio

 

and interactive audio are mixed for output.

 

 

Dolby Digital 2

Dolby Digital audio signals are output. With BD-ROMs, the signals are output

 

without mixing the secondary audio and interactive audio signals.

 

 

Dolby Digital 

Select this when the connected AV receiver or amplifier, etc., is not

PCM

compatible with Dolby Digital audio signals. The Dolby Digital audio signals

 

are converted into linear PCM audio signals for output.

DTS Out

*Only valid for the DIGITAL OUT terminal.

DTS 1

DTS Digital Surround audio signals are output. With BD-ROMs, the

 

secondary audio and interactive audio are mixed for output.

 

 

DTS 2

DTS Digital Surround audio signals are output. With BD-ROMs, the signals

 

are output without mixing the secondary audio and interactive audio signals.

 

 

DTS  PCM

Select this when the connected AV receiver or amplifier, etc., is not

 

compatible with DTS Digital Surround audio signals. The DTS Digital

 

Surround audio signals are converted into linear PCM audio signals for

 

output.

AAC Out

AAC

Select this when the connected AV receiver or amplifier, etc., is compatible

* Only valid for the DIGITAL

 

with AAC audio signals. The AAC audio signals are output.

OUT terminal.

AAC PCM

Select this when the connected AV receiver or amplifier, etc., is not

 

 

compatible with AAC audio signals. The AAC audio signals are converted into

 

 

linear PCM audio signals for output.

 

 

 

DTS Downmix

Stereo

DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or

 

 

DTS Digital Surround audio signals converted to linear PCM audio signals

 

 

are converted into 2-channel (stereo) signals for output.

Speakers

 

Lt/Rt

DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or

 

 

DTS Digital Surround audio signals converted to linear PCM audio signals

 

 

are converted into 2-channel signals compatible with Dolby Surround for

 

 

output (when the connected AV receiver or amplifier, etc., is compatible with

 

 

Dolby Pro Logic, the AV receiver or amplifier outputs the linear PCM audio

 

 

signals as surround audio signals).

Audio Output Mode

2 Channel

Select this when the TV’s analog 2-channel (stereo) audio input terminals are

* Only valid for the AUDIO

 

connected to the player’s AUDIO OUT terminals.

OUT terminals.

Multi-channel

Select this when the multi-channel audio input terminals of an AV receiver or

 

 

amplifier, etc., are connected to the player’s AUDIO OUT terminals.

 

 

Speaker Setup

When an AV receiver or amplifier, etc., is connected to the player’s AUDIO OUT terminals, set

* Only valid for the AUDIO

whether or not speakers are connected to an AV receiver or amplifier, etc., their size and their

OUT terminals.

crossover frequency. For details, see Changing the speaker setup on page 47.

 

 

Speaker Distance

Specify the distance of your speakers from your listening position (page 47).

* Only valid for the AUDIO

 

 

OUT terminals.

 

 

 

 

 

Channel Level

Fix

The output for the various speakers is set to the maximum.

* Only valid for the AUDIO

 

 

Variable

The output level of the various speakers is set within the range of –6.0 dB to

OUT terminals.

 

+6.0 dB (in 0.5 dB steps) (page 47).

43

En

Page 42 Page 44
Image 43
Page 42 Page 44
Contents
BDP-V6000 Risk of Electric Shock Do not Open Information to UserClass Laser Product POWER-CORD Caution Decibel Level Example We Want You Listening For a LifetimeTo establish a safe level Once you have established a comfortable sound levelContents What’s in the box Putting the batteries in the remote controlSoftware updating DVD+R 3,4 Types of discs/files that can be playedPlayable discs Application format Disc type Logo Playing BDs  Discs that cannot be played About playback of unauthorized copies  About audio formatsPlayable files  Playable file extensions Remote ControlPart Names Functions  Supported audio file formatsFront Panel Rear Panel Front Panel Display Keep away from heat Place of installation Do not place objects on top  Do not obstruct the ventilation holesMoving the player Cleaning the pickup lensTurn the power off when not using the player Cleaning the player Extended use of recording discs Installation Procedure02  Specially shaped discs  Condensation on discsRack mount Screw holes * screws Bracket Mount the underplateMount the set on the rack SetAbout Hdmi Connecting using an Hdmi cable About the Hdmi High Speed Transmission  About Pqls function  When connected to a DVI deviceAbout Kuro Link function  To use the Kuro Link functionConnecting an AV receiver or amplifier Connecting a TVConnect the player’s video output directly to your TV Connecting video and audio cablesConnectingcomponents to the USB port About USB external storage devicesNetwork connection Connecting the power cordConnecting the USB external storage device Connecting via an Ethernet hubSelect and set the video and audio output terminals Making settings using the Setup Navigator menu If the Setup Navigator menu is not displayed Setting item Output terminal nameOperating the TV with the player’s remote control Manufacturer Codes TV Preset code list To close the Tools menu Using the Tools menuSwitching the video output terminal to be viewed  To change the setting of the selected item About Film material Switching the output video resolution Press Output Resolution  About the frame/field frequency and NTSC/PAL TV systemsVideo Hdmi OUT terminal Component 04  About the output video resolutionResolution OutputPress  OPEN/CLOSE to open the disc tray and load the disc Press  STANDBY/ON to turn on the powerPlaying discs or files  If the disc menu is displayedForward and reverse scanning Skipping contentSwitching the camera angles Switching the subtitles Turning the Secondary Audio off Switching the audio and secondary audioSwitching the secondary video Displaying the disc informationVideo File Playback functionsDisc/file type Function AudioPlaying from a specific time Time Search Using the Play ModePlaying a specific title Chapter or track SearchPlaying in random order Random Play  To cancel Repeat Play To cancel Random Play Playing repeatedly Repeat PlayRepeat Play Disc/file type Play Mode type Mark 1 BD Closing the Home Media Gallery Playing from the Home Media GalleryPlaying discs Playing image files Adding tracks/files Playing audio filesPlaying in the desired order HMG Playlist  Rotating images Deleting tracks/files from the HMG Playlist  Playing the HMG PlaylistSelect HMG Playlist  When Memory1, 2 or 3 is selected Adjusting the video About Pure Cinema Adjusting the audioAdjusting the Audio DRC  Closing the Video Adjust screen Closing the Lip Sync screen Adjusting the audio delay Lip SyncAdjusting the amount of audio delay  Closing the Channel Level screenSetting Options Explanation Changing the settingsOperating the Initial Setup screen  Closing the Initial Setup screenOptions Explanation English AutoLanguage SubtitleOptionsExplanation  Adjusting the distance of the different speakers  Changing the speaker setup Setting the proxy server  Setting the IP address Testing the network connection  Displaying the network settings Changing to other language at language setting  Changing the Country/Area code  Registering or Changing the password Changing the Parental Lock level for viewing DVDs  Changing the Age Restriction for viewing BD-ROMs Setting the output terminals Restoring all the settings to the factory default settingsSoftware updating Auto About the audio output settingsPage  Language Code Table Language Code Table and Country/Area Code Table Country/Area Code Table  Closing the Advanced Setup screen Operating the Advanced Setup screen Deleting all titles/chapters from the playlist Playing titles/chapters in the registered order PlaylistCreating playlist  Deleting titles/chapters from the playlistPlaying the playlist Select and set Advanced Setup  Playlist Auto Start  OnSerial control specifications Serial interface specificationsConnection to a computer Arguments List of usable commandsAddress Command mnemonicsArguments Communications interface manualzlib FreeType2 Licenseslibxml2 OpenSSLlibjpg libpngAVC/H.264 libupnpNo Warranty GNU Lesser General Public License Do so, and all its terms and conditions for copying Notice on GNU General Public LicenseIs Ntsc on PAL TV properly ProblemPlayback Check RemedyIs DVD 169 Video Out Problem Check RemedyIs TV Aspect Ratio properly Is 43 Video Out properlyAudio Out to PCM Component Video orDigital OUT terminal Is Hdmi Audio Out properlyIs Hybrid Disc Playback Set Hybrid Disc Playback to CD Perform Individual/Shared Data Erase or Storage FormatPerform Application Data Erase Is Hybrid Disc Playback Set Hybrid Disc Playback to DVDBD-LIVE function connection to the Internet cannot be used NetworkCheck that this player and Ethernet hub or router with hub Others Glossary  Hdmi High-Definition Multimedia Interface Specifications Pioneer Corporation
Top Page Image Contents