Chapter 1
Before you start
What’s in the box
•Remote control x 1
•Video/audio cable (yellow/white/red plugs) x 1
•AA/R6 dry cell batteries x 2
•Power cord x 1
•Rack mount bracket x 2
•Underplate x 1
•Included gray screw x 2
•Warranty card
•Operating instructions (this document)
Alarge Phillips screwdriver ( No. 2) is required to mount the rack mount bracket. Please procure one.
Putting the batteries in the remote control
1 Open the rear cover.
Press lightly on this part and slide into the direction of the arrow.
2 Insert the batteries (AA/R6 x 2).
Insert as indicated by the / marks into the battery compartment.
Insert the negative () side first.
3 Close the rear cover.
Close securely (a click should be heard).
01
Caution
•Do not use any batteries other than the ones
specified. Also, do not use a new battery together with an old one.
•When loading the batteries into the remote control, set them in the proper direction, as indicated by the polarity marks ( and ).
•Do not heat batteries, disassemble them, or throw them into flames or water.
•Batteries may have different voltages, even if they look similar. Do not use different kinds of batteries together.
•To prevent leakage of battery fluid, remove the
batteries if you do not plan to use the remote control for a long period of time (1 month or more). If the fluid should leak, wipe it carefully off the inside of the case, then insert new batteries. If a battery should leak and the fluid should get on your skin, flush it off with large quantities of water.
•When disposing of used batteries, please comply with governmental regulations or environmental public institution’s rules that apply in your country/area.
•WARNING
Do not use or store batteries in direct sunlight or other excessively hot place, such as inside a car or near a heater. This can cause batteries to leak, overheat, explode or catch fire. It can also reduce the
life or performance of batteries.
Software updating
When the software is updated, product information concerning this product may be made public on the Pioneer website. Check the update or service information concerning this product.
7
En