Pioneer BDP-V6000 Component Video or, Digital OUT terminal, Is Hdmi Audio Out properly

Is a DVI device connected?

The sound will not be output from the HDMI OUT terminal if a DVI

device is connected. Connect the device to a DIGITAL OUT terminal or

the AUDIO OUT terminals (page 21).

For some BDs, audio signals are only output from DIGITAL OUT

terminal or the HDMI OUT terminal.

Multi-channel sound is not

Is Output Terminal properly

Linear PCM (2-channel) audio signals are output from output terminals

output.

set?

other than the one set at Output Terminal under Audio Out. Set

Output Terminal properly (page 51).

Is the audio output of the

Read the operating instructions of the connected AV receiver or

connected AV receiver or

amplifier and check the audio output settings of AV receiver or

amplifier, etc., properly set?

amplifier.

Is multi-channel sound

Use the menu screen or AUDIO to switch the disc’s sound to multi-

selected?

channel.

Is the AV receiver or

When the AV receiver or amplifier, etc., is connected to the AUDIO

amplifier, etc., connected to

OUT terminals, set Audio Output Mode to Multi-channel (page 43).

the AUDIO OUT terminals?

Also, set Speaker Setup properly (page 47).

Noise can be heard when

Is the connected AV receiver

If an AV receiver or amplifier that is not compatible with DTS Digital

outputting DTS Digital

or amplifier compatible with

Surround is connected to the DIGITAL OUT terminal, set DTS Out to

Surround signals from the

DTS Digital Surround?

DTS  PCM (page 43).

DIGITAL OUT terminal.

192 kHz or 96 kHz digital

It is not possible to output 192 kHz or 96 kHz digital audio signals from

audio signals cannot be

this player’s DIGITAL OUT terminal. The signals are automatically

output from the DIGITAL

converted to 48 kHz or less for output.

OUT terminal.

Secondary audio or

Is HDMI Audio Out properly

When listening to the sound from an HDMI OUT terminal, set HDMI

interactive audio is not

set?

Audio Out to PCM (page 44).

output.

Are Dolby Digital Out and

When listening to the sound from an DIGITAL OUT terminal, set Dolby

DTS Out properly set?

Digital Out to Dolby Digital 1, DTS Out to DTS 1 (page 43).

Sound is fast or slow.

When an HDMI cable is

When a Pioneer AV receiver or amplifier compatible with the PQLS

connected, are audio signals

function is connected directly to the player’s HDMI OUT terminal using

being output from devices

an HDMI cable, the PQLS function is activated when playing discs.

connected with cables other

Because of this, the sound output from components other than the

than HDMI cables?

ones connected by HDMI cable may be fast or slow. If this happens, set

PQLS to Off (page 44).

After a disc is inserted,

Are there too many files

When a disc on which files are recorded is inserted, depending on the

Loading stays displayed and

recorded on the disc?

number of files recorded on the disc, loading may take several dozen

playback does not start.

minutes.

 is displayed in file names,

The characters that cannot be displayed on this player are displayed in

etc.

.