Pioneer BDP-V6000 operating instructions Auto, English

07

HDMI

Setting	Options	Explanation
HDMI High Speed	On	Select this when connected with a High Speed HDMI™ cable (page 18).
Transmission
	Off	Select this when connected with a Standard HDMI™ cable (page 18).

The player’s setting screen is closed if the output video resolution is switched by changing the HDMI High Speed Transmission setting.

HDMI Color Space	Auto	Select this to automatically switch the video output between YCbCr and RGB
		signals according to the connected equipment.
	YCbCr 4:4:4	Select this to output the video signals as YCbCr 4:4:4 signals.
	YCbCr 4:2:2	Select this to output the video signals as YCbCr 4:2:2 signals.
	RGB (16 to 235)	Select this to output the video signals as RGB signals. Choose this if the
		colors seem too dense and all the dark colors are displayed in a uniform black
		when RGB (0 to 255) is selected.
	RGB (0 to 255)	Select this to output the video signals as RGB signals. Choose this if the
		colors seem too faint and the black seems too bright when RGB (16 to 235)
		is selected.

Normally it is recommended to set this to Auto. When set to Auto, the optimum video signals for your TV are output.

HDMI Audio Out	Auto	The signals are output with as many audio channels as possible. In cases
		when the number of channels does not decrease when the signals are output
		as such without converting them to linear PCM, they are output as such
		(page 52).

Network

	PCM	Select this when you want the secondary audio and interactive audio signals
		to be mixed for output or when you want to output prioritizing sampling
		frequency over the number of channels (page 52).
	Off	Select this when you do not want to output the audio from the HDMI output
		terminal.
KURO LINK	On	Select this to control the player with the remote control of the AV device
		connected using an HDMI cable. Also refer to About KURO LINK function on
		page 19.
	Off	Select this when you do not want to control the player with the remote control
		of the AV device connected using an HDMI cable.
Display Power On	On	Select this when you want the TV to turn on each time playback is started or
* Only valid when KURO		the Home Menu or Home Media Gallery is displayed on the player.
LINK is set to On.	Off	Select this when you do not want the TV to turn on each time playback is
		started or the Home Menu or Home Media Gallery is displayed on the player.
Display Power Off	On	Select this when you want the player’s power to turn off together with the TV’s
* Only valid when KURO		power.
LINK is set to On.	Off	Select this when you do not want the player’s power to turn off together with
		the TV’s power.
PQLS	Auto	Enables PQLS function (page 19).
* Only valid when KURO
	Off	Disables PQLS function (page 19).
LINK is set to On.
IP Address	Select this to set the IP address of the player and DNS server (page 48).
Proxy Server	Only set the proxy server if so instructed by your Internet service provider (page 48).
Display Network	Select this to display a list of the network settings (page 49).
Configuration

Language

44

Connection Test	Select this to test the network connection (page 49).
OSD Language	English	Select this to set the language of the on-screen displays to English.
	available languages Choose a language for the on-screen displays from the listed languages.
Audio Language	English	Select this to set both the BD-ROM and DVD-Video default audio language to
* For some discs, it may not		English.
be possible to change to the
	available languages Choose a language from the listed languages to set the default audio
selected language.		language for BD-ROM and DVD-Video playback.
	Other	Continue to the next screen to set the default audio language for BD-ROM
		and DVD-Video playback. You can select the language name or enter the
		code number (see on page 54 for the code table).

En

If a language not recorded on the BD/DVD is set, one of the recorded languages is automatically selected and played.