JVC KW-AVX830 Volume Adjust, Select when the subwoofer is connected, Low Pass Filter, Loudness

Page 35

Sound

Menu item

Selectable setting/item

Initial: Underlined

Fader/Balance

 

 

Fader : Adjust the front and rear speaker output balance.

Fader/Balance

Reset

F6 to R6; Initial 0

 

 

 

 

 

Fader

0

• When using a two-speaker system, set the fader to the center (0).

 

Balance 0

 

 

 

 

 

 

Balance : Adjust the left and right speaker output balance.

Back

 

Exit

L6 to R6; Initial 0

 

 

 

 

 

 

 

Press [5//2/3] or drag [

] to adjust.

 

 

 

• To clear the adjustment, press [Reset].

Volume Adjust *6

Adjust and store the auto-adjustment volume level for each source, comparing

 

to the FM volume level. The volume level will automatically increase or decrease

 

when you change the source.

<Fix> appears if an FM broadcast is selected as the source. –12to +12; Initial 00

Subwoofer Level

Adjust the subwoofer output level.

 

00 to 08; Initial 08

 

 

 

High Pass Filter

Through

: Select when the subwoofer is not connected.

 

On

: Select when the subwoofer is connected.

 

 

Low Pass Filter

Select the crossover frequency between the front/rear speakers and the subwoofer.

 

55Hz, 85Hz, 120Hz

 

 

Amplifier Gain

You can change the maximum volume level of this unit.

 

Off

: Deactivates the built-in amplifier.

 

Low

: VOL 00 to 30 (Select this if the maximum power of the

 

 

speakers is less than 50 W.)

 

High

: VOL 00 to 50

If you change the setting from <High> to <Low> while the volume level is set higher than “VOL 30,”the unit automatically changes the volume level to “VOL 30.”

Loudness

You can activate/deactivate the loudness function.

 

 

Off

: Cancels.

 

 

On

: Boost low and high frequencies to produce a well-balanced

 

 

sound at a low volume level.

 

 

 

 

Rear Speaker *7

You can activate/deactivate the rear speakers.

 

 

• This setting takes effect only when Dual Zone is activated. (

28)

 

Off

: Deactivate the rear speakers.

 

 

On

: Activate the rear speakers.

 

*6 For “DISC/USB”: You can make the adjustments separately depending on the audio format—Dolby digital/MPEG Audio and the others.

*7 Only for KW-AVX838/KW-AVX830.

ENGLISH

35

Image 35
Contents Only for KW-AVX830/KW-ADV793 Sólo para KW-AVX830/KW-ADV793 For canceling the display demonstration, seeModel No Serial No To prevent accidents and damage Information For U.S.AContents How to reset your unitSelect Off Display Setup screenFinish the procedure Adjust the hour 1, then the minuteAttaching plate Basic operationsDetaching ~ While the unit is turned on AttachingOpen/Tilt screen Basic operations on the monitor panelMode AV MenuEqualizer SoundOff ProxTouch ∞ / 4 / ¢ When the source is TunerWhen the source is AV-INor EXT-IN Playback control on the touch panelUSB Selecting the playback sourceKW-AVX838/KW-AVX830KW-ADV793/KW-AVX738 DiscBand Preset list operationsWhen an FM stereo broadcast is hard to Receive Listening to the radioWide When the FM reception is interferedStoring-station Sequential Memory for FM only Auto~To eject a disc Open the monitor panel Disc/USB operationsPlaying a disc Prohibiting disc ejectionCD/VCD Playable disc typeDisc type Recording format, file type, etc DVDUSB cable from the rear of the unit Do not start the car engine if a USB device is connectedFor more details about USB operations Disc/file playback operations Return Operation buttons on the screenEnter MenuSelect the playback mode Listening to the iPod/iPhone device Connecting iPod/iPhoneSetting the iPod control mode Setting for watching videoTrack information bars Playback modeSelects a track/video.*3 All To select the playback modeTo cancel, select Off To select the speed of audio books One~ Select SAT as the source GCI Global Control Information updateFor Sirius Radio For XM Radio Check your Sirius IDSelecting a channel on the list Tuning in to a channel you wantPreset number*1 Channel number Only for Sirius Selects a preset channel PressRefer to page 11 for basic radio operations What is HD Radio Technology?Searching for HD Radio stations only Search for a station-Auto SearchAudio automatically Changing HD Radio reception modeTuning to analog audio only Tuning to digital audio onlyManual Using other external componentsTo view the navigation screen Full regardless of the Aspect settingDisplaying navigation screen You cannot select USB/iPod for the main source To change the aspect ratio To adjust the pictureTo display the picture KW-AVX838 KW-AVX830Sound equalization Using a rear view cameraSelect a sound mode Storing your own adjustmentsMenu item Selectable setting/item AV Setup/Sound/Equalizer menu itemsDisplay Selectable setting/itemInitial UnderlinedMenu item Off, Auto DiscSubtitle *4 Hours, 24 Hours OffNer Muting1 AV InputExternal Input Beep Off55Hz, 85Hz, 120Hz Volume AdjustSelect when the subwoofer is connected Low Pass FilterIcons for phone types Information for using Bluetooth devicesBluetooth profile PIN code initial Connecting Bluetooth devicesClose the monitor panel Change the PIN codeConfirmation screen appears. Press Yes Make sure to disconnect the device when it is connectedTo disconnect Selects the group.*5 Using the Bluetooth audio playerStart playback PausesEnding the call When Auto Answer is activatedReceiving a call Display Dial Menu Making a callOperate the target mobile phone Select a preset numberDisplay Settings Copying the phone bookTo copy the phone book manually Selecting which phone book/ call lists to useLast New PairingMIC Setting Dial Menu *1KW-ADV793 Bluetooth operations for KW-ADV793Registration Pairing methods If you skip changing PIN code, press Enter You can enter any number you like 1-digit to 16-digit numberTo connect Unit displays the list of the preset devicesSelect a device you want to connect Use Open or Search to connectDisplays Dial Menu screen Be registeredExcept and VOL + To read the message later, press No To read the message, press YesSelect a telephone number to store To call a preset numberSelect the phone number you want to Tag data*1 *2 current track title/artist name/album title ~ Select BT Audio as the source Start playbackCan be registered To connect a new deviceBluetooth device settings Source Operations Installing the batteriesBefore using the remote controller Button ENT enter button Using the number buttonsDisc @/# buttonsVCD Using the disc menuSearching for an item directly WMA/WAV/VCD/CDSelecting playback modes Using the on-screen barUsing the list screen Selecting a folder or track on the control screenDo not use the following discs MaintenanceRecommended cleaning method Playing Jpeg files More about this unitGeneral Playing MPEG1/MPEG2 filesHD Radio reception Only for KW- AVX830/KW-ADV793 Upper and lower cases Numbers and symbolsPlaying MP3/WMA/WAV files Satellite radio operations Only forThrough the analog terminals Speaker out/REAR OUT/FRONT OUT Only for KW-AVX830/KW-ADV793 IPhone is a trademark of Apple IncOnly for KW-AVX838/KW-AVX830/KW-ADV793 Eral TroubleshootingSymptom Disc in general GeneralMPEG1/MPEG2/MP3/WMA/WAV USB IPod/iPhone Satellite radio Only for KW-AVX830/KW-ADV793 Symptom Remedy/CauseKW-ADV793 AV-INBluetooth for KW-AVX838/KW-AVX830 Bluetooth for KW-ADV793 ≤ 1% THD+N Power OutputDVD/CD Unit mm inch Required space for installation and the monitor ejectionOperating Voltage SleeveBluetooth 기능을 사용할 수 있는 국가 Countries where you may use the Bluetooth functionSlovenija Slovensko Hrvatska Magyarország Ireland ÉireIii Country Call Advertencias Installation IN-DASH MountingFije el panel del monitor Electrical Connections Conexiones ElectricasJVC Localización DE Averias TroubleshootingLye E0984 Italiano Upolorneni Before installation, remove the screw Control panel to the main unit 3el= PO BOX BEDFORD, TX Product Registration Gaiantii Pour tout produit utilise a des fins To OUR Valued Customer JVC