JVC KW-AVX830 Installing the batteries, Source Operations, Before using the remote controller

REFERENCE

Using the remote controller (Only for KW-AVX838/KW-AVX738)

KW-AVX838 KW-AVX738

For KW-AVX830/KW-ADV793:To use the remote controller, purchase RM-RK252P separately.

Installing the batteries

R03/LR03/AAA

Insert the batteries (not supplied) into the remote controller by matching the polarity (+ and –) correctly.

Caution:

• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

• Battery shall not be exposed to excessive heat such as sunshine, fire, or the like.

If the effectiveness of the remote controller decreases, replace the batteries.

Before using the remote controller:

• Aim the remote controller directly at the remote sensor on the unit.

• DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting).

The unit is equipped with the steering wheel remote control function.

•See the Installation/Connection Manual (separate volume) for connection.

•Operations may differ depending on the types of the steering wheel remote control.

Operations using the remote controller (RM-RK252)

If the remote controller does not work, try following;

•Deactivate Dual Zone. ( 28) (While Dual Zone is activated, the remote controller only functions for operating the DVD/CD player.)

•Replace the battery.

Button		Source	Operations
	*1		• Turns the power on.
		—	• Turns the power off. (Hold)
			• Attenuates/restores the sound.
	*1	—	Changes the display information.
*1 Only for KW-AVX838/KW-AVX830: When Dual Zone is activated, these buttons cannot be used.
			Continued on the next page

ENGLISH

53