AMX FG147-04 manual Configuration Mode, IR Transmit Mode, Timeout Adjustment, Download Mode

Programming The MIO R-1 AUDIO

IR Code Matrix (Cont.)

Configuration Mode

The configuration mode allows you to set the following device features:

IR Transmit Mode (38 KHz or 455 KHz)

Timeout Adjustment

Download Mode

Debug Mode

Battery Type

LED Awake Brightness

Sleep Brightness

To enter configuration Mode:

1.Press and hold the STOP button and the INPUT button. The two buttons must be pressed within 0.1 seconds of each other and held down for 2 seconds. The device indicates you are now in configuration mode. See below for available modes.

2.Press the EXIT key when you are finished.

Note: Your settings will not be lost in the event your batteries die or are removed.

IR Transmit Mode

Pressing button "1" on the remote toggles the IR transmission mode between 38Khz and 455Khz. The display indicates the current mode.

Timeout Adjustment

Press button "2" on the remote to change the sleep timeout from the default. Each time "2" is pressed, the sleep timeout raises incrementally. The pre-determined sleep time-outs are:

3seconds

6seconds

9seconds

12seconds

The display indicates the selected sleep timeout.

Download Mode

Pressing "3" on the remote toggles the Download mode OFF and ON. The Download mode must be ON before you can download a file to the MIO R-1 AUDIO. While the Download mode is ON the device will not go to sleep. A power cycle will return the device to Download OFF.