AMX FG147-04 manual Setting The IR Frequency, Debug Mode, Battery Type, LED Awake Brightness

Page 12

Programming The MIO R-1 AUDIO

Debug Mode

Pressing button "4" on the remote toggles development mode between ON and OFF. The display indicates the selected mode. In development mode, the display shows the IR code assigned to buttons when pressed.

This mode is useful to the programmer when determining what IR codes are associated to each mode.

Battery Type

Pressing button "6" on the remote toggles the battery type between Normal and Recharge. The display indicates the selected type. The type of battery in the MIO R-1 AUDIO dictates the battery type you need to set.

LED Awake Brightness

Pressing button "7" on the remote toggles the Power LED brightness mode from LOW to MED and then HIGH. The display indicates the selected mode.

Sleep Brightness

Pressing button "8" on the remote toggles the Sleep brightness mode from OFF to LOW and then MED. The Sleep brightness is the state the MIO R-1 AUDIO assumes while in the charging cradle.

Setting The IR Frequency

The MIO R-1 AUDIO is set to the IR frequency 38KHz by default. You need to utilize the IRMODE Serial Command to change the frequency to 455KHz. To set the frequency to 455KHz:

1.Establish a HyperTerminal session with your device.

2.Send "IRMODE 455" to the device.

3.Close the HyperTerminal session.

The command, "IRMODE 38" switches the device back to 38KHz.

8	MIO R-1 AUDIO

Image 12

Contents MIO R-1 Audio AMX Limited Warranty and Disclaimer Table of Contents Direct Numeric Access MIO R-1 Audio remote controller OverviewSpecifications Touch And Tilt SensorMIO R-1 Audio Setup Installing Your Custom ButtonsInserting Batteries into the MIO R-1 Audio Battery Low Indicator Using Connector Ports on The MIO R-1 Audio Programming The MIO R-1 AudioIR Code Matrix IR Code MatrixConfiguration Mode IR Transmit ModeTimeout Adjustment Download ModeSetting The IR Frequency Debug ModeBattery Type LED Awake BrightnessUpdating MIO R-1 Audio Firmware Click Query for DevicesPersistent Serial Commands Serial CommandsMIO Remote Charging Base MIO-RCC Charging BaseInstalling The Rechargeable Battery Rechargeable Battery Port on The MIO Remote Charging The MIO Remote with Charging BaseChanging Battery Modes Configuration ModeUsing the MIO R-1 Audio Remote Tone Control & SRS SettingSRS WOW, Bass Boost, 3D and Focus Settings Privacy Mode Zone ControlSource Control Internal Tuner and Audio ServerCD and DVD Satellite and OtherDirect Numeric Access Custom XMTuners CD Player / ChangerPresets Creating a PresetRecalling a Preset Clearing All PresetsGroup Volume Control Zone GroupingAdding a Zone To a Group Grouping All ZonesFavorites Creating a favorite For a Specific SourceClearing favorite for a Specific Source and Specific Zone Clearing All Favorites for All Sources for specific ZoneAlarm Setting Alarm TimeClearing Alarm For a Specific Zone Clearing Alarm For All ZonesKeypad Lockout Locking a Specific KeypadUnlocking a Specific Keypad Unlocking All KeypadsMIO R-1 Audio MIO R-1 Audio It’s Your World Take Control