AMX FG147-04 manual Zone Grouping, Adding a Zone To a Group, Un-Grouping All Zones

Page 24

Using the MIO R-1 AUDIO Remote

Zone Grouping

In this state, zones can be "grouped" together and controlled as a single zone. Press the "GRP" button to enter "Group Mode".

Group (GRP) button

FIG. 8 Group (GRP) button

Adding a Zone To a Group

1.Press the "GRP" button to enter "Group Mode".

2.Key in zone # to add to group.

3.Press ENTER (to exit Group Mode).

The zone from which zone grouping is being administered, is assumed to be the 1st zone in the grouping. It should, therefore, not be added to the grouping.

Grouping All Zones

1.Press the "GRP" button to enter "Group Mode".

2.Key in "99".

3.Press ENTER (to exit Group Mode).

Un-Grouping All Zones

1.Press the "GRP" button to enter "Group Mode".

2.Key in "00".

3.Press ENTER (to exit Group Mode).

Group Volume Control

Adjusting Volume for the entire Group can be made at any time, as follows:

1.Press the "GRP" button to enter "Group Mode".

2.Volume UP / DOWN as required (NAV Up/Down buttons).

3.Press ENTER (to exit Group Mode).

All zones will have the volume increased/decreased by the adjustment being made.

To bring all zones to the same volume level (after individual zone adjustments have been made), enter Zone Grouping mode and decrease the volume to 0db, then increase the volume to desired level.

20

MIO R-1 AUDIO

Page 23 Page 25
Image 24
Page 23 Page 25
Contents
MIO R-1 Audio AMX Limited Warranty and Disclaimer Table of Contents Direct Numeric Access MIO R-1 Audio remote controller OverviewSpecifications Touch And Tilt SensorMIO R-1 Audio Setup Installing Your Custom ButtonsInserting Batteries into the MIO R-1 Audio Battery Low Indicator Using Connector Ports on The MIO R-1 Audio Programming The MIO R-1 AudioIR Code Matrix IR Code MatrixConfiguration Mode IR Transmit ModeTimeout Adjustment Download ModeSetting The IR Frequency Debug ModeBattery Type LED Awake BrightnessUpdating MIO R-1 Audio Firmware Click Query for DevicesPersistent Serial Commands Serial CommandsMIO Remote Charging Base MIO-RCC Charging BaseInstalling The Rechargeable Battery Rechargeable Battery Port on The MIO Remote Charging The MIO Remote with Charging BaseChanging Battery Modes Configuration ModeUsing the MIO R-1 Audio Remote Tone Control & SRS SettingSRS WOW, Bass Boost, 3D and Focus Settings Privacy Mode Zone ControlSource Control Internal Tuner and Audio ServerCD and DVD Satellite and OtherDirect Numeric Access Custom XMTuners CD Player / ChangerPresets Creating a PresetRecalling a Preset Clearing All PresetsGroup Volume Control Zone GroupingAdding a Zone To a Group Grouping All ZonesFavorites Creating a favorite For a Specific SourceClearing favorite for a Specific Source and Specific Zone Clearing All Favorites for All Sources for specific ZoneAlarm Setting Alarm TimeClearing Alarm For a Specific Zone Clearing Alarm For All ZonesKeypad Lockout Locking a Specific KeypadUnlocking a Specific Keypad Unlocking All KeypadsMIO R-1 Audio MIO R-1 Audio It’s Your World Take Control
Related manuals
Manual 30 pages 33.74 Kb