AMX FG147-04 manual Charging The MIO Remote with Charging Base

Page 17

MIO Remote Charging Base

5.Remove the back housing.

6.Place the new housing on the device so that the rechargeable battery port connection is now accessible. See FIG. 8.

7.Replace the 6 screws.

8.Connect the terminal end of the Lithium-Ion battery to the port shown in FIG. 8. It may be necessary to use a thin, blunt object to fully seat the battery connector within its port.

Lithium Ion Battery

Rechargeable

Battery

Port Connection

FIG. 8 Rechargeable Battery Port on The MIO Remote

9.Press the battery between the rubber pads, with sticker showing, in the housing area of the MIO remote. Confirm battery is flush with bottom of battery enclosure on bottom housing.

10.Replace the battery door and slide to lock it in place.

11.Begin charging the battery.

Charging The MIO Remote with Charging Base

The MIO remotes receive power for charging from a charging base.

1.Connect the terminal end of the power supply to the bottom external power port on the MIO remote charging base. See FIG. 6 for location.

2.Route the cable through the provided channel so that it comes out the side of the base.

3.Connect the power cord to an external power source.

4.Place the bottom of the MIO remote into the charging base so the contacts on the device are on top of the charging contacts inside the charging base. The Power LED on the MIO remote blinks red to indicate it is charging and illuminates solid red when it is done. Full charge cycle for a depleted battery is approximately 3 hours.

Avoid placing units equipped with AAA batteries in the charging base.

MIO R-1 AUDIO

13

 

 

Page 16 Page 18
Image 17
Page 16 Page 18
Contents MIO R-1 Audio AMX Limited Warranty and Disclaimer Table of Contents Direct Numeric Access Overview MIO R-1 Audio remote controllerTouch And Tilt Sensor SpecificationsInserting Batteries into the MIO R-1 Audio MIO R-1 Audio SetupInstalling Your Custom Buttons Battery Low Indicator Programming The MIO R-1 Audio Using Connector Ports on The MIO R-1 AudioIR Code Matrix IR Code MatrixIR Transmit Mode Configuration ModeTimeout Adjustment Download ModeDebug Mode Setting The IR FrequencyBattery Type LED Awake BrightnessClick Query for Devices Updating MIO R-1 Audio FirmwareSerial Commands Persistent Serial CommandsMIO-RCC Charging Base MIO Remote Charging BaseInstalling The Rechargeable Battery Charging The MIO Remote with Charging Base Rechargeable Battery Port on The MIO RemoteConfiguration Mode Changing Battery ModesSRS WOW, Bass Boost, 3D and Focus Settings Using the MIO R-1 Audio RemoteTone Control & SRS Setting Zone Control Privacy ModeInternal Tuner and Audio Server Source ControlCD and DVD Satellite and OtherCustom XM Direct Numeric AccessTuners CD Player / ChangerCreating a Preset PresetsRecalling a Preset Clearing All PresetsZone Grouping Group Volume ControlAdding a Zone To a Group Grouping All ZonesCreating a favorite For a Specific Source FavoritesClearing favorite for a Specific Source and Specific Zone Clearing All Favorites for All Sources for specific ZoneSetting Alarm Time AlarmClearing Alarm For a Specific Zone Clearing Alarm For All ZonesLocking a Specific Keypad Keypad LockoutUnlocking a Specific Keypad Unlocking All KeypadsMIO R-1 Audio MIO R-1 Audio It’s Your World Take Control
Top Page Image Contents