AMX FG147-04 manual Updating MIO R-1 Audio Firmware, Click Query for Devices

Page 13

Programming The MIO R-1 AUDIO

Updating MIO R-1 AUDIO Firmware

Updating firmware in the MIO R-1 AUDIO is also done through the programming jack. To update the main firmware for the MIO R-1 AUDIO:

1.Connect the MIO R-1 AUDIO to your computer via the programming jack (FIG. 3).

2.Put the device into Download mode, as shown on page 7.

3.Open NetLinx Studio.

4.Set the Master Communication Settings to Axcess Master and set the baud rate to 115200.

5.Go to Tools > Firmware Transfers > Send to Axcess Device... This opens the Send to Axcess Dialog Window(FIG. 4).

FIG. 4 Send to Axcess Dialog Window

6.Browse to the location of the firmware file.

7.Select the file within the Files frame.

8.Click Query for Devices.

9.The Query For Devices field will display a complete list of all devices currently connected to NetLinx Studio capable of accepting the firmware file selected. Select the MIO R-1 AUDIO.

In most cases, the MIO R-1 AUDIO is the only device on the list.

10.Click Send.

11.After device firmware download, check one more time to verify the firmware version change.

12.Click Close.

13.Upon confirmation of a successful send, you can exit NetLinx Studio and disconnect the programming jack.

MIO R-1 AUDIO	9

Image 13

Contents MIO R-1 Audio AMX Limited Warranty and Disclaimer Table of Contents Direct Numeric Access Overview MIO R-1 Audio remote controllerTouch And Tilt Sensor SpecificationsInstalling Your Custom Buttons MIO R-1 Audio SetupInserting Batteries into the MIO R-1 Audio Battery Low Indicator Programming The MIO R-1 Audio Using Connector Ports on The MIO R-1 AudioIR Code Matrix IR Code MatrixIR Transmit Mode Configuration ModeTimeout Adjustment Download ModeDebug Mode Setting The IR FrequencyBattery Type LED Awake BrightnessClick Query for Devices Updating MIO R-1 Audio FirmwareSerial Commands Persistent Serial CommandsMIO-RCC Charging Base MIO Remote Charging BaseInstalling The Rechargeable Battery Charging The MIO Remote with Charging Base Rechargeable Battery Port on The MIO RemoteConfiguration Mode Changing Battery ModesTone Control & SRS Setting Using the MIO R-1 Audio RemoteSRS WOW, Bass Boost, 3D and Focus Settings Zone Control Privacy ModeInternal Tuner and Audio Server Source ControlCD and DVD Satellite and OtherCustom XM Direct Numeric AccessTuners CD Player / ChangerCreating a Preset PresetsRecalling a Preset Clearing All PresetsZone Grouping Group Volume ControlAdding a Zone To a Group Grouping All ZonesCreating a favorite For a Specific Source FavoritesClearing favorite for a Specific Source and Specific Zone Clearing All Favorites for All Sources for specific ZoneSetting Alarm Time AlarmClearing Alarm For a Specific Zone Clearing Alarm For All ZonesLocking a Specific Keypad Keypad LockoutUnlocking a Specific Keypad Unlocking All KeypadsMIO R-1 Audio MIO R-1 Audio It’s Your World Take Control