AMX FG147-04 manual Using the MIO R-1 Audio Remote, Tone Control & SRS Setting

Page 19

Using the MIO R-1 AUDIO Remote

Using the MIO R-1 AUDIO Remote

Tone Control & SRS Setting

To access the Tone Control and SRS settings, press the TONE button (FIG. 1). This enables the Tone Control Mode with BASS as the first mode selected.

TONE button

FIG. 1 TONE button

There are 3 Tone Control Modes available for adjustment, and 4 SRS options, as follows:

BASS: Increase / Decrease from -10dB to +10dB (Up/Down NAV buttons)

Treble: Increase / Decrease from -10dB to +10dB (Up/Down NAV buttons)

Balance: Left / Right (Up NAV button = right, Down NAV button = left)

SRS options: BASS Boost, Focus, 3D, WOW

When first entering Tone Control Mode, BASS mode is active. To move from mode to mode, select the Center NAV button. This saves the setting and moves to the next mode.

While in each of the modes, press the Center NAV button to return to the default for that mode.

SRS (WOW, Bass Boost, 3D and Focus) Settings

Use the UP Nav button to cycle through the SRS Settings: BASS Boost, Focus, 3D, WOW (in that order).

Use the Down NAV button to cycle backwards to the previous SRS setting.

Press & hold the Center NAV button to disengage/clear the SRS settings (none of the SRS modes will be engaged).

Press the Center NAV button save SRS Mode & exit from Tone Control set-up.

NAV Up

Center NAV button

NAV Down

FIG. 2 Center NAV button

Only one SRS mode can be engaged per room/zone. Each room/zone, however, can have a different SRS mode.

Moving from one SRS position to another disengages the original setting (for example, moving from WOW to BASS BOOST disengages WOW).

MIO R-1 AUDIO

15

 

 

Page 18 Page 20
Image 19
Page 18 Page 20
Contents MIO R-1 Audio AMX Limited Warranty and Disclaimer Table of Contents Direct Numeric Access Overview MIO R-1 Audio remote controllerTouch And Tilt Sensor SpecificationsInstalling Your Custom Buttons MIO R-1 Audio SetupInserting Batteries into the MIO R-1 Audio Battery Low Indicator Programming The MIO R-1 Audio Using Connector Ports on The MIO R-1 AudioIR Code Matrix IR Code MatrixDownload Mode Configuration ModeIR Transmit Mode Timeout AdjustmentLED Awake Brightness Setting The IR FrequencyDebug Mode Battery TypeClick Query for Devices Updating MIO R-1 Audio FirmwareSerial Commands Persistent Serial CommandsMIO-RCC Charging Base MIO Remote Charging BaseInstalling The Rechargeable Battery Charging The MIO Remote with Charging Base Rechargeable Battery Port on The MIO RemoteConfiguration Mode Changing Battery ModesTone Control & SRS Setting Using the MIO R-1 Audio RemoteSRS WOW, Bass Boost, 3D and Focus Settings Zone Control Privacy ModeSatellite and Other Source ControlInternal Tuner and Audio Server CD and DVDCD Player / Changer Direct Numeric AccessCustom XM TunersClearing All Presets PresetsCreating a Preset Recalling a PresetGrouping All Zones Group Volume ControlZone Grouping Adding a Zone To a GroupClearing All Favorites for All Sources for specific Zone FavoritesCreating a favorite For a Specific Source Clearing favorite for a Specific Source and Specific ZoneClearing Alarm For All Zones AlarmSetting Alarm Time Clearing Alarm For a Specific ZoneUnlocking All Keypads Keypad LockoutLocking a Specific Keypad Unlocking a Specific KeypadMIO R-1 Audio MIO R-1 Audio It’s Your World Take Control
Top Page Image Contents