3Com 530 Connecting to a Single Workstation, To connect the OfficeConnect Remote to in-house LAN

Page 29

Figure 1-5 Connect The UTP Cable To In-House Lan Connection Box

To connect the OfficeConnect Remote to in-house LAN:

1Connect the UTP cable (not supplied) into RJ45 socket marked LAN on the OfficeConnect Remote.

2Connect the other end of the cable into the female socket of the in-house LAN connection box, as shown in Figure 1-5, or directly to a 10BaseT hub port.

Using the Rubber Feet and Stacking Clips

1-15

Connecting to a Single Workstation

To connect the OfficeConnect Remote to a single personal computer or workstation:

1Implement the crossover for the 10BaseT port on the OfficeConnect Remote by setting the MDI/MDIX switch to MDIX (out).

2Connect the UTP cable (not supplied) directly into the RJ45 socket marked LAN on the OfficeConnect Remote.

3Connect the other end to the 10BaseT socket on the workstation’s Ethernet adapter.

Image 29

Contents User Guide Officeconnecttm Remote3Com Corporation 5400 Bayfront Plaza Santa Clara, California Disconnect the power adapter before moving the unit Important Safety InformationWAN = Selv Wichtige Sicherheitshinweise’INFORMATION DE Sécurité Importante Page Contents Management Connector Interface B-1 Specifications B-1Dimensions B-4 WAN Port Connecting Cable V.11/X.21Index Page This table shows where to find specific information How to Use This GuideAbout this Guide IntroductionText conventions used in this guide are ConventionsIcon conventions that are used throughout this guide are Additional Safety Information Additional Safety InformationAbout this Guide Getting Started OfficeConnect Remote FeaturesGetting Started Benefits of Isdn Easy to install, configure and supportPack Contents Checklist Registering Ownership Of Your OfficeConnect Remote Pre-installation RequirementsFront Panel OfficeConnect Remote Front and Rear Panel FeaturesQuick flash Self test or software loading during power up Getting Started Rear Panel WAN OfficeConnect Remote 520 and 530 only Introduction Using the Rubber Feet and Stacking Clips Installation Siting the OfficeConnect Remote To prolong the operational life of your equipmentClipping Your Units Together Wall Mounting the OfficeConnect RemoteConnecting to Your 10BaseT LAN Connecting the Power AdapterTo connect the OfficeConnect Remote to in-house LAN Connecting to a Single WorkstationCounter-clockwise to unlock it and remove it Connecting to Your 10Base2 LANConnecting to the Voice Port Connecting to IsdnConnecting to the WAN Location of OfficeConnect Fax and Print Servers Connecting a Management TerminalStarting Quick Configuration Quick ConfigurationMain Menu Screen At the command prompt enter QCAbout Quick Configuration Setting the Unit Name Press CTRL+E to submit this information Connecting to a Novell IPX NetworkComplete the fields on this screen as follows 12 Connecting To An IP Host On The Same Network Connecting to an IP Host on the Same IP Network13 Connecting to an IP Host on a Different Network Connecting to an IP Host on a Different IP NetworkPress CTRL+E to submit this information 14 Connecting To The Internet Or PPP Router Connecting to the Internet or a PPP RouterGetting Started Press CTRL+E to save this information Password is case-sensitiveMonitoring Isdn Line Usage Setting Up a WAN LinkSetting Up a WAN Link Novell Network Examples of Typical Isdn Networking ApplicationsExamples of Typical Isdn Networking Applications Disconnected. In this way Isdn calls are kept to a minimum192.000.000.xxx IP Host on the Same IP NetworkIP Host on Another IP Network 18 IP routed network Internet or PPP Router19 PPP Connections to the Internet and Corporate Network 20 Multiple Connections from a Single Site Multiple Connections from a Single SiteTroubleshooting TroubleshootingSoftware Reference guide for more Bridging and Routing Concepts Bridging and RoutingHow Bridges Learn Guidelines For Choosing Bridging or RoutingBridging and Routing Concepts Bridging Between Remote SitesBuilding a Larger Network Figure A-2 Multiple Remote Bridges Multiple Paths Between Bridged LANsOptimum Use of Resource Network TopologyBroadcast Storms Internet Routing IP and IPXNetwork Organization, Structure and Physical Layout Figure A-4 Open Systems Interconnection Network Layer Model IP Routing Bridging and Routing Routing IP and IPX A-11 IPX RoutingClass C IP AddressesMask, for example Subnet MaskingHuntmar park Drive USA InterNIC, Network SolutionsHerndon KruislaanNumbered and Unnumbered Links Bridging and Routing Technical Information SpecificationsPerformance Bridge CharacteristicsApprovals FCC Requirement Dimensions WAN Port Connecting Cable V.11/X.21 Support Interface Cable CharacteristicsWAN Port Connecting Cable V.24/V.28 Support WAN Port Connecting Cable V.35/V.36 Support Manager Port Connecting Cable Modem Cable LAN Port Connecting Cable 10BaseTOrdering Information Glossary 100BaseVG An Ieee standard for using the new IeeeChapter C Glossary Page Chapter C Glossary Page Chapter C Glossary Page Topology The way that a network is physically laid out Technical Support On-line Technical Services3Com Bulletin Board Service World Wide Web Site Support from Your Network SupplierSupport from 3Com To obtain an RMA number, call or fax Returning Products for RepairTechnical Support Numerics IndexLAN Limited Warranty OfficeConnect Remote EMC Update