Viper G5102V manual Interpreting zone diagnostics, Nuisance prevention circuitry

Zone Description Dealer installed options

1Trunk Pin

2Instant trigger: a heavier impact detected by the shock sensor

3Door switch trigger

4Instant trigger: For optional sensors

5Ignition trigger

6Hood Pin

➤Interpreting zone diagnostics

Warn Away responses are not reported by arming or disarming diag- nostics. If you receive a Bypass notification when arming or a Tamper Alert notification when disarming, look at the LED.

Active or triggered zones will be indicated by a pattern of blinks by the LED.

For example: If zone 3 was active or triggered, the LED will blink three times with a two-second pause. Then it will blink three times again, and repeat until the ignition is turned on.

➤Nuisance prevention® circuitry

Your system has Directed’s Nuisance Prevention® Circuitry (NPC). It prevents annoying repetitive trigger sequences due to faulty door pin switches or environmental conditions such as thunder, jackhammers, airport noise, etc.

For example: If the alarm triggers three times within a 60-minute period and each time the same sensor or switch triggers the alarm, NPC will

© 2008 Directed Electronics. All rights reserved. 35