Universal Electronics ATLAS OCAP 5-Device manual Using the Master Power KEY

www.urcsupport.com/atlasocap

22

USING THE MASTER POWER KEY

The Atlas OCAP 5-Device Remote Control with Learning has a unique feature that allows you to sequentially turn up to five of your home entertainment devices on or off with a single key press.

NOTE:	MASTER POWER (PWR) only works in the CBL
	mode. If it is not programmed, only the cable
	converter will turn on or off. In any other
	mode, pressing MASTER POWER (PWR) once
	will turn the selected device on or off.

Programming the Master Power Key

1.	On the remote control, press and hold SETUP
	until the last-selected device key blinks twice.

2. Enter 9 9 5. The last-selected device key blinks twice.

3. Press PWR once.

4. For the first device you want in the power on sequence, press a device key (e.g., CBL) once.

Then press PWR once. For the second device in the power sequence, press its key once (e.g, TV). Then press PWR.

5.Repeat step 4 up to four more times to add the second, third, fourth, and fifth device, as desired.

6.To save the settings and exit the program:

a.Press CBL once.

b.Press and hold SETUP until the CBL key blinks twice.