Universal Electronics ATLAS OCAP 5-Device RE-ASSIGNING Device Keys, Using the Master Power Key

Page 23

Using the Master Power Key

1.After programming, point the remote control

at the devices. Press CBL once.

2.Press PWR once to sequentially turn the

programmed home entertainment devices on or off.

You will see the devices turn on or off according to the programmed sequence.

Clearing the Master Power Key

1.On the remote control, press and hold SETUP

until the last-selected device key blinks twice.

2.Enter 9 9 5. The last-selected device key blinks twice.

3.Press and release PWR.

4.Press and hold SETUP until the CBL key blinks twice.

RE-ASSIGNING DEVICE KEYS

The Atlas OCAP 5-Device Remote Control with Learning can be set up to control a second device of an already- assigned type. For example, to have the unit control a TV, a Cable Converter, and two audio devices (for example, two audio receivers), re-assign the unused VCR key to operate the second audio device as follows:

NOTE:

VCR is preset at the factory to control an RCA

 

VCR. Performing the steps below will over-

 

write those settings.

1.On the remote control, press VCR once; it will blink once. Then press and hold SETUP until

the VCR key blinks twice.

2. Enter 9 9 2. The VCR key will blink twice.

www.urcsupport.com/atlasocap

23

Image 23
Contents Preprogrammed for Your SET-TOP BOX Table of Contents Page Introduction Features and Functions KeyFunction Key ChartsUse VOL+ or VOL- to raise or lower the audio volume Device Key Device TableInstalling Batteries Programming Device Control Aim the remote control at the deviceSetting UP a Combo Unit Searching for Your Code Aim the remote control at your combo devicePage Checking the Codes Using LearningLearning Precautions Programming a Learned Key TV, or CBL Deleting a Single Learning KeyUnlocking Channel Control Programming Channel Control LockLocking Channel Control to CBL Changing Volume LockLocking Volume Control To One Mode Global Volume Lock Programming Macro Keys Programming Cable ID LockClearing a Macro Key Programming a Macro KeyProgramming the Master Power Key Using the Master Power KEYRE-ASSIGNING Device Keys Using the Master Power KeyClearing the Master Power Key VCR Setup 9 9 2 VCR VCR VCR Setup 9 9 2 AUD VCRVCR Setup 9 9 2 TV VCR VCR Setup 9 9 2 CBL VCRActivating Backlighting Optional TroubleshootingFCC Notice Additional Information MANUFACTURER’S Codes Setup Codes for Audio AmplifiersSetup Codes for Audio Receivers AMW MCS JBLKLH LXI1023, 1609, 1254 ABC Setup Codes for Audio AccessoriesSetup Codes for Cable Boxes/Converters SSI1256 Setup Codes for DVD Players Setup Codes for Cable/DVR/PVR CombosESA BBKCavs JSI GPX0591, 0692 SVA Page Setup Codes for DVD Combos LCD Setup Codes for DVD RecordersHTS GOIABS UsdtvSetup Codes for DVR/PVR Systems CCE AOCCXC Page KTV JCBKEC KMCNTC MTC1447, 0047, 1958 SSS TVS TMKSetup Codes for TVs Hdtv 0047 Setup Codes for TVs Plasma Setup Codes for TV/DVD Combos Hitachi 1247 ILo 1472 Initial Jensen 1016 Setup Codes for TV/VCR Combos Setup Codes for TV/VCR/DVD Combos Setup Codes for VCRs HI-Q Keen 0693 Kenwood 0067, 0041, 0038 0060, 0240, 0042 STS Dvico Setup Codes for Video AccessoriesDDI SMC Setup Codes for Video Accessories HdtvPage Page M1056L Revision