Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 22
SEARCHING FOR YOUR CODE
If your TV,VCR, or Cable Converter does not respond to the Millennium 3 after trying all of the codes listed for your brand, or if your brand is not listed at all, try search- ing for your code.
For example, to search for a code for your TV:
1.Turn on your TV.
2. 
On the Millennium 3, press and hold SETUP until the LED blinks twice, then release SETUP.
3.
Enter 9 - 9 - 1. The LED will blink twice.
4.
Aim the remote control at the the TV and slowly alternate between pressing ▲ and TV.
Stop when the TV turns off.
NOTE: In the search mode, the Millennium 3 will send IR codes from its library to the selected compo- nent, starting with the most popular code first.
5.
Press SETUP once to lock in the code.
6.To search for the codes of other components, repeat steps 1 through 5, but substitute the appropriate key (i.e., VCR or CBL) for the (VCR or Cable) component you are searching for.
22