Universal Electronics MILLENNIUMTM 3 manual To clear the Option key

Page 25

Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 25

To clear the OPTION key:

1. On the Millennium 3, press and hold SETUP until the LED blinks twice, then release SETUP.

2.Enter 9 - 9 - 5. The LED will blink twice.

3. Press OPTION once.

4. Press and hold SETUP until the LED blinks twice, then release SETUP.

5.The OPTION key is now clear and ready for reprogramming.

25

Image 25
Contents Millennium Table of Contents Introduction Features and Functions Key Charts Key Charts Installing Batteries Programming TV Control Setup Codes for TVsAOC JBL CXCJCB KEC JVCKTV LXITMK SSSProgramming VCR Control Setup Codes for VCRsHI-Q CCEKLH STS 0038 Programming TV/VCR Combo Control Setup Codes for TV/VCR Combos To program the Cable key To unlock the Cable keyTo lock the Cable key Setup Codes for Cable ConvertersABC NSCHTS Setup Codes for DBS ReceiversTo Reset Channel Control To Cable Converter Using the Shift KEYTo Reset VCR Transport Keys for VCR Use To Activate TV’s Channel Control CapabilitiesSearching for Your Code Enter 9 9 0. The LED will blink twice Checking the CodesTo program Option for all On/Off To program Option to remember channelsTo clear the Option key Problem TroubleshootingSolution Additional Information Millennium 3 Mnl M3090 8/16/99 926 AM