Universal Electronics MILLENNIUMTM 3 To lock the Cable key, Setup Codes for Cable Converters, Abc

Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 19

4.Aim the Millennium 3 at your Cable Converter or DBS Receiver and press CBL once. The unit should turn off. If it does not respond, repeat steps 2-3, trying each code listed for your brand until you find one that works. If it still does not work , try searching for the code (see Searching For Your Code on page 22).

5.Write your Cable Converter or DBS Receiver code in the boxes below for future reference.

NOTE: Remember, to use the Millennium 3 to operate your Cable Converter or DBS Receiver, press CABLE first.

To lock the Cable key:

1. On the Millennium 3, press CBL once. Press and hold SETUP until the LED blinks twice, then release SETUP.

2. Enter 9 - 9 - 7. The LED will blink twice.

3. Press CH + once. The LED will blink twice.

Setup Codes for Cable Converters:

ABC	0003, 0008, 0017, 0013
ABC Cable	0033
Americast	0899
Contec	0019
General Instrument	0476,0276,0810
GoldStar	0144
Hamlin	0020,0259
Jerrold	0003,0012,0476,0276,0810
Macom	0033
Memorex	0000
Movie Time	0063
NSC	0063
Oak	0019
Optimus	0021
Panasonic	0000,0107,0021
Paragon	0000
Pioneer	0144,0533
Pulsar	0000
Quasar	0000
RCA	0021
Regal	0020,0259
Runco	0000

continued on next page...

19