Universal Electronics MILLENNIUMTM 3 manual Installing Batteries

Page 7

Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 7

INSTALLING BATTERIES

1.On the back of the Millennium 3, push the tab and lift off the battery cover.

2.Obtain two (2) fully-charged AA alkaline bat- teries. Match the + and – marks on the batter- ies to the + and – marks in the battery case, then insert the new batteries.

3.Press the battery cover back into place. The tab should click when the cover is locked.

4.Test the unit by any mode key (e.g. VCR, TV, or CBL). If the batteries are inserted correctly, the LED will blink once.

NOTE: Whenever batteries need replacement, the Millennium 3 will blink twice with every key press. Simply replace the batteries and the Millennium 3 will be restored to its full functionality, complete with your favorite settings.

7

Image 7
Contents Millennium Table of Contents Introduction Features and Functions Key Charts Key Charts Installing Batteries Programming TV Control Setup Codes for TVsAOC JBL CXCJCB LXI JVCKEC KTVTMK SSSProgramming VCR Control Setup Codes for VCRsHI-Q CCEKLH STS 0038 Programming TV/VCR Combo Control Setup Codes for TV/VCR Combos To program the Cable key To unlock the Cable keyNSC Setup Codes for Cable ConvertersTo lock the Cable key ABCHTS Setup Codes for DBS ReceiversTo Activate TV’s Channel Control Capabilities Using the Shift KEYTo Reset Channel Control To Cable Converter To Reset VCR Transport Keys for VCR UseSearching for Your Code Enter 9 9 0. The LED will blink twice Checking the CodesTo program Option for all On/Off To program Option to remember channelsTo clear the Option key Problem TroubleshootingSolution Additional Information Millennium 3 Mnl M3090 8/16/99 926 AM