Precor P/N 300753-201 manual To tighten the handlebars completely, Handrail attachment detail

28Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 883 / 833 / 823

3.Insert the right handlebar into the handlebar clamp until the foam grip touches the side of the handlebar clamp.

4.Apply pressure to the handlebar and rotate it back and forth to ease it into the handlebar clamp.

5.Slide the inner handlebar cap onto the lower handlebar.

6.Thread one hex head screw through the handlebar and handlebar mount. Partially tighten the screw.

Figure 16: Handrail attachment detail

7.Repeat steps 1 through 7 to attach the opposite handlebar.

To tighten the handlebars completely:

1.Use the wrench included with the unit, or a 1³₈-inch socket, box, or open-end wrench, to tighten the handlebar screws fully.

2.Use a ³₁₆-inch hex wrench to tighten the two handlebar clamp fasteners fully.