
MODELS:
OPTION MENU
OPTION MENU
1.Press the <MENU> button on the remote control.
2.Press the buttons
Option Menu
Initialize |
|
Power Restore | OFF |
Production Mode | OFF |
Digital Signal Strength | <1~9> |
NetCommand Software | Vxx xxx.xx |
Total hours of use | 0 |
|
|
DIGITAL SIGNAL STRENGTH
1.Tune to a Digital Channel.
2.From the Option Menu, scroll down and highlight “Digital Signal Strength.”
3.Press <ENTER>. The screen will display the Digital Signal Strength Menu.
Digital Signal Strength Menu
"Digital Signal Strength" <ENTER>
| Tuner |
Frequency(MHz) | 749 |
Signal Level | <1~9> |
Modulation | 8VSB Air |
Carrier Lock | Locked |
SNR | 29.09 |
Correctable errors | 0 |
Un Correctable errors | 0 |
|
|
SNR Recommended Levels:
8VSB = 16 to 33
64 QAM = 22 to 35
256 QAM = 27 to 38
Page 25