Mitsubishi Electronics WD-60737, WD-52527, WD-73837, WD-73737 Introduction, Product Safety Notice

MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737

WD-65837 / WD-73837 / WD-82837

INTRODUCTION

This service manual provides service instructions for the V41C, V41 and V41+ chassis types. The specific models for each chassis type, dimensions and weight are listed below. Service personnel should read this manual thoroughly before servicing these chassis.

MODEL	CHASSIS	HEIGHT	W IDTH	DEPTH	W EIGHT	POW ER
						USAGE
W D-60C9	V41C	36.7"	53.9"	14.4"	64.9 lbs	260W
W D-60737	V41	36.7"	53.9"	14.4"	64.9 lbs	260W
W D-65C9	V41C	39.5"	58.2"	15.3"	72.2 lbs	260W
W D-65737	V41	39.5"	58.2"	15.3"	72.2 lbs	260W
W D-65837	V41+	39.5"	58.2"	15.3"	72.2 lbs	260W
W D-73C9	V41C	43.6"	65.2"	17.5"	92.84 lbs	260W
W D-73737	V41	43.6"	65.2"	17.5"	92.84 lbs	260W
W D-73837	V41+	43.6"	65.2"	17.5"	92.84 lbs	270W
W D-82737	V41	48.5"	73.2"	22.7"	139.7 lbs	270W
W D-82837	V41+	48.5"	73.2"	22.7"	139.7 lbs	270W

This service manual includes:

1.Assembly and disassembly instructions for cabinet and chassis components.

2.Servicing of the Lenticular Screen and Fresnel Lens.

3.Servicing printed circuit boards (PCBs).

4.Electrical and Mechanical adjustments.

6.Chip parts replacement procedures.

7.Circuit block diagrams.

The parts list section of this service manual includes:

1.Cabinet and screen parts.

2.Electrical parts.

Schematic and block diagrams of the above listed models are included in this service manual for better understanding of the circuitry.

PRODUCT SAFETY NOTICE

Many electrical and mechanical parts in television receivers have special safety related characteristics. These charac- teristics are often not evident from visual inspection nor can the protection afforded by them necessarily be obtained by using replacement components rated for higher voltage, wattage, etc.

Replacement parts which have special safety characteristics are identified in this service manual.

Electrical components having such features are identified by shading on the schematic diagram and parts list of this service manual. The replacement for any safety part should be identical in value and characteristics.

Pb Solder	The PWBs used in this chassis are constructed using Lead-Free Solder. When servicing use
	only recommended Lead-Free Solder. Refer to the section “Using Lead Free Solder.”

Page 5