MODELS:
Phase 2 - 4:3 and 16:9 Alignment
1.With the Manual Geometry Alignment activated, press < 
> to enter the 4:3 Alignment Mode. The pattern below will be displayed.
Note: Pressing < > will toggle between the 4:3,16:9 (top & bottom) and 16 Point Geometry Alignment modes.
2.In the 4:3 Alignment Mode, continuing to press <XX> will cause the geometry pattern to be displayed with 11 different preset amounts of correction. Continue pressing <WW> or <XX> to cycle through the 11 patterns until you find the one with the straightest Blue 4:3 Lines. It may help to count the patterns as you cycle through them. When you find the pattern with the straightest Blue 4:3 Lines, press < 
>. The Top 16:9 Alignment Mode will then be activated as indicated by the Top Red 16:9 Line displayed in the pattern.
4:3 MODE |
Select Straightest Blue Lines |
3.In the Top 16:9 Alignment Mode, continuing to press <XX> will cause the geometry pattern to be displayed with 15 different preset amounts of correction to the Top Red 16:9 Line. Continue pressing <WW> or <XX> to cycle through the 15 patterns until you find the one with the straightest Top Red 16:9 Line. Again, count the patterns as you cycle through them. When you find the pattern with the straightest line, press < 
>. The Bottom 16:9 Alignment Mode will then be activated as indicated by the Bottom Red 16:9 Line displayed in the pattern.
4:3 MODE
Select Straightest Red Line (Top)
Page 34