Mitsubishi Electronics WD-52631 manual Ieee 1394 Recording Symptom Remarks

Page 100

100Appendices

Appendix D: Troubleshooting, continued

IEEE 1394 Recording

Symptom

Remarks

1. Program to be recorded was correctly

The broadcaster supplied program information that was incorrect

selected from ChannelView, however, incor- and/or was changed after a recording was added to the Record

rect program was recorded.

List.

2.Incomplete ChannelView program recorded. Recording device may lack sufficient blank space to make a full recording.

3. ChannelView program recording failed.

• Connection and compatibility issues with IEEE 1394

 

(FireWire®) digital devices. This may include too many

 

Firewire devices in use at one time, or the recording device

 

not understanding the record command.

 

• Television lost power long enough to lose current clock time.

 

• TV energy Mode was set to Low Power. Change TV Energy

 

mode to Fast Power On. Press MENU, open the Setup menu,

 

highlight the Fast Power On radio button, press ENTER.

4. Cannot record to or from the IEEE 1394

• To initiate a recording to IEEE 1394 device, press the

device, including dubbed recordings.

(RECORD) key. The Record menu displays allowing setup of

 

the recording.

The source device for the recording is not powered on.

When dubbing, the destination device for the recording is not powered on.

The wrong medium (analog tape for digital recording, or digital tape for the analog recording) is in the device.

The program is copy protected.

The program has already been recorded once and the copy protection only allows one recording.

Unapproved source device for copy protected material.

The recording device can not decode the copyright signal included in the signal source (try another device if available).

The playing device (for dubbing) does not support copy- righted material.

Source for recording is copyrighted

Too many IEEE 1394 devices in network. Insufficient band- width available. Disconnect unused devices.

Source Device has higher speed (S 400) than record device. If possible, reverse devices, play in the slower device and record in the faster device.

IEEE 1394 Devices

 

Symptom

Remarks

 

 

1.

Excessive digital artifacts appear when

• The IEEE 1394 cable is too long; 15 feet between devices is

 

viewing an IEEE 1394 device.

the maximum.

 

 

• There may be a slow device in the middle of the IEEE 1394

 

 

network. Move the slow devices to the end so that connec-

 

 

tions for faster devices do not pass through them.

 

 

 

2.

D-VHS recordings for digital cable have

Digital cable signals on IEEE 1394 can exceed the data rate stan-

 

drop-outs (loss of picture or sound), or no

dards supported by DVCR.

 

playback.

 

Image 100
Contents WD-52631 WD-57731 WD-65731 U T I O N For Your Records Model Number check one WD-52631WD-57731WD-65731Serial Number Purchase Date Retailer Name LocationContents Operating Other Devices with the Remote Control Using the TV with a Personal ComputerUsing Ieee 1394 Devices AppendicesStand Requirement Demo ModeStandby Fan General Cleaning Warnings Top and Sides of the TVScreen Unauthorized SoftwareImportant Safeguards Read, Retain and Follow All InstructionsPower Lines Page Package Contents Special Features of Your TV Television OverviewPackage Contents Special Features of Your TVGuidelines for Setting Up and Using Your New Widescreen TV Additional TV SetupDigital Cable Ready CableCARD, Models WD-57731 Getting StartedControlling Sound Volume Turning the TV On or OffIf You Turn Off the TV by Mistake Changing ChannelsSystem Reset Button ResetTV Front Panel Control PanelLamp Indicator Status IndicatorPOWER/TIMER Indicator LED Color TV Condition Additional InformationUsing a CableCARD CableCARD menu Network SetupCableCARD Technology CableCARD MenuTV Back Panel ANT 1/MAIN, ANT 2/AUX AntennaCableCARD Slot Input 1 and 2 InputsComponent 1 and 2 Inputs Hdmi 1Page TV Connections Before You Begin Choosing a Language for MenusMore About Auto Input Sensing Ieee 1394 ConnectionsDigital Video and Home Recording Connection Type into the TV Effect on Home RecordingPicture Quality Name Signal Type Connection TypesVideo and Combined Audio/Video Connections Audio-Only ConnectionsHdtv Cable Box or Satellite Receiver with Component Video Nent /AUDIO Left and Audio Right onWall Outlet Cable no cable box Can be used with a CableCARD, models WD-57731For an antenna with flat twin leads VHF LeadsFor cable or antenna with coaxial lead VCR to an Antenna or Wall Outlet Cable OptionalConnecting a VCR to a cable box VCR to a Cable Box Audio & VideoConnecting an Hdmi device Receiver Stereo System DVD Player with Component VideoTo connect an analog A/V receiver Older Cable Box CamcorderTV Operation Remote Control OverviewRecord/Playback Keys VOLBattery Installation Sleep TimerResetting the Remote Control Low-Battery IndicatorUsing ChannelView Feature InstructionsChoosing a Program Source ChannelView Channel ListingsStatus Display Analog ProgramDigital Program Digital Ieee 1394 DeviceTV Signals and Display Formats Signal DefinitionsDVD Definitions TV Display Format DefinitionsTV Display Formats Split Screen OperationSplit Screen Operations Instructions PAUSE. PressTV Inputs for Split Screen Split Screen DisplaysANT Input Component Page TV Menu Settings 3D Graphical Menu System Remote Control ButtonsMenu Screens Main Menu Setup Menu Clock Setup MenuLanguage Setup Menu Memorize Channels Setup MenuSetting the Clock Automatically Set TimeDevice ChannelInput Name Menu Icon Order MenuDVD DVD2 VCRChannel Menu TerminologyFAV Setup Using the Channel Menu Using FAV ChannelsFAV Setup Using Only the Remote Control FAV Channel MenuCaptions Menu FontSize ColorBackground Opacity FontParental Lock Menu Lock by Time Parental Lock MenuFront Panel Lock Parental Lock Menu Front Panel LockRatings Menu Other Ratings MenuBypassing the Ratings Lock and Lock by Time TV Ratings TV Content CategoriesMovie Ratings Audio/Video Menu Analog and Digital Audio Settings Analog-Only Audio SettingsDigital-Only Audio Settings Ieee 1394 Amplifier SettingsPersonal Computer Video Settings Contrast BrightnessTV Menu Settings Operating Other Devices with the Remote Control Functions Available for Other A/V Devices Programming the Remote Control Method 1 Code EntryMethod 2 Code Search Code VerificationResetting the Remote Control Programming CodesAudio Lock Universal A/V Receiver Control Audio Amplifiers Brand CodeGPX JBLKLH CD Players Brand CodeCable Boxes Brand Code NSC TFCDVD Players/Recorders Brand Code AMWNEC JSISVA Laser Disc Players Brand Code Satellite Receivers Brand CodeGOI HTSVCRs and DVRs Brand Code STS TMKPage Using the TV with a Personal Computer Video Adjustments SetupTo Remove the Computer Icon from the Input Selection Menu Computer with DVI Monitor Output Connecting a Computer to the TVComputer with Hdmi Monitor Output Connecting a computer with a VGA 15-pin monitor output Computer with VGA 15-Pin Monitor Output Analog VideoAdjusting Image Resolution Select Control PanelAvailable for your computer’s video signal As Displayed on TV ScreenFormat 16 X 9 Standard 3 Standard 640 XUsing Ieee 1394 Devices Direct Device-To-Device Method OverviewHub Connection Method Tips for Connecting Ieee 1394 Devices Ieee 1394 AmplifiersIeee 1394 Devices and the Input Selection Menu Ieee 1394 CamcordersImmediate Recording from the Recording Setup Menu Time-Delayed Recording from the MenuRecording Signal Type TV Input Recording to Ieee 1394 Recordable DevicesTime-Delayed Recording from ChannelView To Cancel a Recording in ProgressTo Cancel a Scheduled Recording Immediate Recording from ChannelViewTo Power On or Off a Compatible Ieee 1394 Device TV Remote Control and Ieee 1394 DevicesOperation of Ieee 1394 Devices with the TV’s Remote Control Retention Period DiscsTo Copy a Track to Another Ieee 1394 Device Switching Between Analog and Digital Ieee 1394 Outputs Appendix B Specifications Appendix D TroubleshootingPage Appendix a Bypassing the Parental Lock Bypassing the Parental LockThis page intentionally left blank Appendix B Specifications Inputs Description Qty Signal Type Input SpecificationsPicture Technology ReceptionDigital Interfaces Outputs Description Qty Output SpecificationsHdmi Lamp Life Appendix C Lamp Cartridge ReplacementTo Order a New Lamp Installing the New Lamp Cartridge Removing the Old Lamp CartridgeDisposal of the Old Lamp Cartridge TighteningAppendix D Troubleshooting TV Reset FunctionsReset Name When to Use How to Use Resulting Action Demo Mode Off buttonService Service and SupportSupport General TV Operation Symptom Remarks TV Channels Symptom RemarksTV Power On/Off Symptom Remarks Picture Symptom RemarksIndicators Symptom Remarks Sound Symptom RemarksIeee 1394 Recording Symptom Remarks Ieee 1394 Devices Symptom RemarksAppendix D Troubleshooting Trademark and License Information Mitsubishi TV Software 103To Obtain Warranty Service 104105 This Limited Warranty does not CoverMitsubishi Digital Electronics AMERICA, INC Index VCR Demo Mode MDEAservice@mdea.comSystem Reset