Mitsubishi Electronics WD-52631 manual Choosing a Program Source, ChannelView Channel Listings

Page 36

36Chapter 3. TV Operation

Choosing a Program Source

NOTE: If your only viewing sources are connected to the ANT 1 and ANT 2 antenna jacks, you can switch inputs without the Input Selection menu. Press INPUT to switch between ANT 1 and ANT 2. To verify which is the current source while watching TV, press INFO to see the on-screen status display.

Selecting from Multiple Sources: The Input Selection Menu

The Input Selection menu allows you to select an input to watch on the TV. The current input appears as a gold- colored icon.

1.Press INPUT on the TV’s remote control to display the Input Selection menu (Figure 2).

2.To select a different input, press on the TV’s remote control to move the highlight through icons in the input section.

3.Press ENTER to switch to the device and close the menu.

More About the Input Selection Menu

•To assign meaningful labels to the icons, such as “VCR” or “DVD,” see the “Input Name” section of chapter 4, “TV Menu Settings.”

•To rearrange the icons, see the “Icon Order” section of chapter 4, “TV Menu Settings.”

•To use with IEEE 1394 devices, see additional informa- tion in chapter 7, “Using IEEE 1394 Devices.”

Input Section

Figure 2. Input Selection menu

IMPORTANT

To receive ChannelView updates: Set the Energy Mode to Fast Power On and leave the TV powered off for a while each day. If the TV loses power, program listings will be lost until the next update.

ChannelView™ Channel Listings

ChannelView provides listings, as sent by the broadcast- ers, for memorized channels on ANT 1 or ANT 2. Digital channels are indicated with a “D” and analog channels with an “A.” Digital channels are shown with the major channel and sub-channels (or bitstreams). The analog channel name is displayed if you entered a name in the Channedl menu.

Note: If limited data is shown or no program data ap- pears, it is because the broadcaster is not sending the information. This is not a defect of your TV.

Using ChannelView

 

Feature

Instructions

 

 

 

 

 

 

 

View listings while viewing

Press GUIDE.

 

 

ANT 1 or ANT 2.

 

 

 

 

 

 

Scan through memorized

Press

or .

 

channels one by one.

 

 

 

 

 

 

 

 

 

Scan quickly through memo-

Press PAGE

/ .

 

rized channels.

 

 

 

 

View detailed information for

Press

or

to highlight

 

digital channels.

a channel and press .

 

 

 

 

 

 

Return to viewing basic list-

Press .

 

 

 

ings information

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 3. ChannelView screen, current programs. Use to exchange displays for current and future programs.

Figure 4. ChannelView screen, future programs on the selected channel (digital channels only)

Page 35 Page 37
Image 36
Page 35 Page 37
Contents WD-52631 WD-57731 WD-65731 U T I O N For Your Records Model Number check one WD-52631WD-57731WD-65731Serial Number Purchase Date Retailer Name LocationContents Operating Other Devices with the Remote Control Using the TV with a Personal ComputerUsing Ieee 1394 Devices AppendicesDemo Mode Stand RequirementStandby Fan General Cleaning Warnings Top and Sides of the TVScreen Unauthorized SoftwareImportant Safeguards Read, Retain and Follow All InstructionsPower Lines Page Package Contents Special Features of Your TV Television OverviewPackage Contents Special Features of Your TVGuidelines for Setting Up and Using Your New Widescreen TV Additional TV SetupDigital Cable Ready CableCARD, Models WD-57731 Getting StartedControlling Sound Volume Turning the TV On or OffIf You Turn Off the TV by Mistake Changing ChannelsSystem Reset Button ResetTV Front Panel Control PanelLamp Indicator Status IndicatorPOWER/TIMER Indicator LED Color TV Condition Additional InformationUsing a CableCARD CableCARD menu Network SetupCableCARD Technology CableCARD MenuTV Back Panel ANT 1/MAIN, ANT 2/AUX AntennaCableCARD Slot Input 1 and 2 InputsComponent 1 and 2 Inputs Hdmi 1Page TV Connections Before You Begin Choosing a Language for MenusMore About Auto Input Sensing Ieee 1394 ConnectionsDigital Video and Home Recording Connection Type into the TV Effect on Home RecordingPicture Quality Name Signal Type Connection TypesVideo and Combined Audio/Video Connections Audio-Only ConnectionsHdtv Cable Box or Satellite Receiver with Component Video Nent /AUDIO Left and Audio Right onWall Outlet Cable no cable box Can be used with a CableCARD, models WD-57731VHF Leads For an antenna with flat twin leadsFor cable or antenna with coaxial lead VCR to an Antenna or Wall Outlet Cable OptionalConnecting a VCR to a cable box VCR to a Cable Box Audio & VideoConnecting an Hdmi device DVD Player with Component Video Receiver Stereo SystemTo connect an analog A/V receiver Older Cable Box CamcorderTV Operation Remote Control OverviewRecord/Playback Keys VOLBattery Installation Sleep TimerResetting the Remote Control Low-Battery IndicatorUsing ChannelView Feature InstructionsChoosing a Program Source ChannelView Channel ListingsStatus Display Analog ProgramDigital Program Digital Ieee 1394 DeviceTV Signals and Display Formats Signal DefinitionsDVD Definitions TV Display Format DefinitionsTV Display Formats Split Screen OperationSplit Screen Operations Instructions PAUSE. PressSplit Screen Displays TV Inputs for Split ScreenANT Input Component Page TV Menu Settings Remote Control Buttons 3D Graphical Menu SystemMenu Screens Main Menu Setup Menu Clock Setup MenuLanguage Setup Menu Memorize Channels Setup MenuSetting the Clock Automatically Set TimeDevice ChannelInput Name Menu Icon Order MenuDVD DVD2 VCRChannel Menu TerminologyFAV Setup Using the Channel Menu Using FAV ChannelsFAV Setup Using Only the Remote Control FAV Channel MenuCaptions Menu FontSize ColorBackground Opacity FontParental Lock Menu Lock by Time Parental Lock MenuFront Panel Lock Parental Lock Menu Front Panel LockRatings Menu Other Ratings MenuBypassing the Ratings Lock and Lock by Time TV Content Categories TV RatingsMovie Ratings Audio/Video Menu Analog and Digital Audio Settings Analog-Only Audio SettingsDigital-Only Audio Settings Ieee 1394 Amplifier SettingsPersonal Computer Video Settings Contrast BrightnessTV Menu Settings Operating Other Devices with the Remote Control Functions Available for Other A/V Devices Programming the Remote Control Method 1 Code EntryMethod 2 Code Search Code VerificationResetting the Remote Control Programming CodesAudio Lock Universal A/V Receiver Control Audio Amplifiers Brand CodeGPX JBLKLH CD Players Brand CodeCable Boxes Brand Code NSC TFCDVD Players/Recorders Brand Code AMWJSI NECSVA Laser Disc Players Brand Code Satellite Receivers Brand CodeGOI HTSVCRs and DVRs Brand Code STS TMKPage Using the TV with a Personal Computer Setup Video AdjustmentsTo Remove the Computer Icon from the Input Selection Menu Connecting a Computer to the TV Computer with DVI Monitor OutputComputer with Hdmi Monitor Output Connecting a computer with a VGA 15-pin monitor output Computer with VGA 15-Pin Monitor Output Analog VideoAdjusting Image Resolution Select Control PanelAvailable for your computer’s video signal As Displayed on TV ScreenFormat 16 X 9 Standard 3 Standard 640 XUsing Ieee 1394 Devices Overview Direct Device-To-Device MethodHub Connection Method Tips for Connecting Ieee 1394 Devices Ieee 1394 AmplifiersIeee 1394 Devices and the Input Selection Menu Ieee 1394 CamcordersImmediate Recording from the Recording Setup Menu Time-Delayed Recording from the MenuRecording Signal Type TV Input Recording to Ieee 1394 Recordable DevicesTime-Delayed Recording from ChannelView To Cancel a Recording in ProgressTo Cancel a Scheduled Recording Immediate Recording from ChannelViewTV Remote Control and Ieee 1394 Devices To Power On or Off a Compatible Ieee 1394 DeviceOperation of Ieee 1394 Devices with the TV’s Remote Control Discs Retention PeriodTo Copy a Track to Another Ieee 1394 Device Switching Between Analog and Digital Ieee 1394 Outputs Appendix B Specifications Appendix D TroubleshootingPage Appendix a Bypassing the Parental Lock Bypassing the Parental LockThis page intentionally left blank Appendix B Specifications Inputs Description Qty Signal Type Input SpecificationsPicture Technology ReceptionOutputs Description Qty Output Specifications Digital InterfacesHdmi Appendix C Lamp Cartridge Replacement Lamp LifeTo Order a New Lamp Installing the New Lamp Cartridge Removing the Old Lamp CartridgeDisposal of the Old Lamp Cartridge TighteningAppendix D Troubleshooting TV Reset FunctionsReset Name When to Use How to Use Resulting Action Demo Mode Off buttonService and Support ServiceSupport General TV Operation Symptom Remarks TV Channels Symptom RemarksTV Power On/Off Symptom Remarks Picture Symptom RemarksIndicators Symptom Remarks Sound Symptom RemarksIeee 1394 Recording Symptom Remarks Ieee 1394 Devices Symptom RemarksAppendix D Troubleshooting Trademark and License Information Mitsubishi TV Software 103To Obtain Warranty Service 104This Limited Warranty does not Cover 105Mitsubishi Digital Electronics AMERICA, INC Index VCR MDEAservice@mdea.com Demo ModeSystem Reset
Top Page Image Contents