Chapter 2. TV Connections | 23 |
Before You Begin, continued
Name assigned to the device
Figure 3. The ClearThought Auto Input Sensing screen for IEEE 1394 devices includes a check box for an associated analog connection.
If your IEEE 1394 device has an analog connection to the TV, follow the instructions below.
1.Connect the device to the TV with an IEEE 1394 cable first.
2.When the New 1394 Device screen appears with the Analog Connection check box highlighted, press ENTER to enter a check mark. See figure 3, New 1394 Device screen.
Note: It is important to check mark the box when this screen appears upon first connecting the
device, as later changes can only be made after returning all TV settings to their defaults.
3.In the New 1394 Device screen, note the name assigned to the device, as you will need to use the same name in a later step. See figure 3.
4.Connect the device to the TV with the supplemental analog cables.
5.The next screen is the Auto Input Sensing screen (see figure 2) in which you can select a name for the device. Select the same name you noted in the New 1394 Device screen (see figure 3).
•If you select the wrong name for the device, you will be unable to switch between the analog and digital inputs to the TV.
•If you connect an IEEE 1394 cable box and it is detected as CABLE in the New 1394 Device screen, be sure to select the name CABLE as the name for the analog input and not cablebox.
To Add an Analog Connection at a Later Time (not recommended)
1.Disconnect the IEEE 1394 device from the TV.
2.Reset all TV settings to their defaults using the TV Reset service menu as follows:
a.Press MENU to display the Main menu.
b.Press 1 2 3 to open the Reset service menu.
c.Press ENTER.
3.Reconnect the IEEE 1394 device to the TV, using the IEEE 1394 cable first.
4.When the TV recognizes the device, place a check in the Analog Connection check box.
5.Press EXIT.
Digital Video and Home Recording
The table below will help you decide which type of connection to use for digital video. Digital video comes to your home in a compressed state, whether received on recorded media (e.g., disc) or broadcast over the air, over cable, or via satellite. Some compressed digital video is available for recording as noted in the table.
Connection Type into the TV | Effect on Home Recording |
|
|
HDMI or DVI | You cannot record the resultant uncompressed video sent to the TV |
Compressed video is converted to | via HDMI or DVI. |
uncompressed form by an external device |
|
such as a cable box, satellite receiver, or |
|
DVD player before it is sent to the TV on an |
|
HDMI or DVI cable. |
|
IEEE 1394 (FireWire®) Connections | You can record compressed digital video either |
Your TV can receive and decode digital | • on compatible digital recorders as digital signals using IEEE 1394 |
channels, MPEG2 compressed digital video, | connections |
and Dolby Digital audio. | • converted to analog signals and recorded as |
| composite video from the MONITOR OUT jack |
| You may be unable to record some programming because of copy restric- |
| tions added by the content owners. |