Chapter 7. Using IEEE 1394 Devices | 83 |
Recording to IEEE 1394 Recordable Devices, continued
Recording from the ChannelView™ Channel Guide
ChannelView provides program listings, as sent by the broadcasters, for memorized channels on ANT 1 and ANT 2. Press the GUIDE key while watching ANT 1 or ANT 2 to view ChannelView listings and to set up imme- diate or future recordings as described here.
Immediate Recording from ChannelView
1.Press INPUT to open the Input Selection menu. High- light an ANT 1 or ANT 2 program source and press
ENTER.
2.Press GUIDE to open the ChannelView channel guide for the current input.
3.Use 
to highlight the channel and program you wish to record from the list of channels.
4.Press 
(RECORD).
A red “R” temporarily displays next to the program listing to indicate the program will be recorded.
5.Press EXIT to return to TV viewing.
Time-Delayed Recording from ChannelView
Set Up the Recording
1.Ensure that TV Energy Mode is set to Fast Power On and the TV clock is set to the correct time and day. See “Setup Menu” in chapter 4, “TV Menu Settings.”
2.Perform steps 1 and 2 described above.
3Press 
to highlight the source channel you wish to record from.
4.Press 
to view a list of future programs on that channel.
5.Press 
to highlight a future program.
6.Press 
(RECORD).
A red “R” temporarily displays next to the program listing to indicate the program will be recorded. You can schedule a maximum of 32 recordings.
7.Press EXIT to close the menu.
Confirm the Recording Setup
1.Press 
(RECORD) to open the Record menu.
2.Press GUIDE to open the Record List (figure 2) and view all scheduled recordings. Press CH 
/
to page quickly through the list.
3.Verify that the program you wish to record appears in the list.
4.Press EXIT to close the menu.
Cancelling Recordings
To Cancel a Recording in Progress
1.Press INPUT to open the Input Selection menu.
2.Move the highlight to the source input icon. There is no need to press ENTER.
The Input Selection menu displays an icon for an active recording connection to a recordable IEEE 1394 device. See the IEEE 1394 connection icon in figure 3.
3.Press CANCEL. The connection icon will disappear to indicate termination of the recording connection.
4.Press EXIT to return to TV viewing.
Connection
Icon
Audio
Icons
Figure 3. The Input Selection menu displays specialized icons for IEEE 1394 devices. The audio icons are displayed only when an IEEE 1394 amplifier is connected.
To Cancel a Scheduled Recording
1.Press 
(RECORD) to open the Record menu.
2.Press GUIDE to open the Record List (figure 2) and view all scheduled recordings. Press CH 
/
to page quickly through the list.
3.Highlight the program you wish to remove from the Record List and press CANCEL.
4.Press EXIT to close the menu.