Appendices 99
Appendix D: Troubleshooting, continued
Picture
| Symptom | Remarks |
8. | When viewing a stopped VCR, white lines | • Turn off video mute for the VCR. |
| are rolling on the screen. | • Begin playing the tape. |
|
| • Change the VCR input to the antenna input. |
|
|
|
9. | Screen is black when trying to view digital | The PerfectColor™ color balance has been incorrectly set. Press |
| channels or IEEE 1394 device. | VIDEO repeatedly until you see the PerfectColor option and press |
|
| ENTER to open the PerfectColor ™ menu. |
|
|
|
10. | DVCR analog/digital problems. | If the tape is currently playing but no picture displays, there may |
|
| be a mismatch of the media with the display. Press INPUT to |
|
| display the Input Selection menu. Press ENTER for the DVCR |
|
| device. If digital is selected, try analog, or if analog is selected, try |
|
| digital. |
|
|
|
Indicators
| Symptom | Remarks |
1. | Lamp indicator light is a constant red. | Turn the TV off for at least 2 minutes. Turn it back on. If light is |
|
| still red, the lamp has failed. Replace it. See Appendix C for |
|
| lamp replacement information. For questions, call Mitsubishi |
|
| Consumer Relations at |
|
|
|
2. | Lamp indicator light is a flashing yellow. | Lamp cover door is open or lamp cartridge is not secure. See |
|
| Appendix C for lamp replacement information. |
|
|
|
3. | Status indicator light is a steady yellow. | Room temperature has exceeded proper levels. Cool the room. |
|
|
|
4. | Status indicator light is a steady/flashing | Service is required. Contact your dealer or a Mitsubishi Autho- |
| red. | rized Service Center to arrange for a service evaluation. Listings |
|
| of Mitsubishi Authorized Service locations can be obtained from |
|
| our web site, |
|
| 2119. |
|
|
|
Sound
| Symptom | Remarks |
1. | There is no sound even when the | • Check if the MUTE button is on. |
| volume is turned up. | • The TV’s “Listen to:” setting may be set to SAP. |
|
| • Check that the TV Speakers setting is On in the Audio/Video menu. |
|
| • If using an IEEE 1394 amplifier, check audio source in Input Selection |
|
| menu. |
|
| • Use the SYSTEM RESET button to perform system reset. |
|
|
|
2. | The sound does not match the screen | • The TV’s Listen to: setting may be set to SAP. |
| picture. | • If using stereo or A/V receiver speakers, check their input selec- |
|
| tion. |
|
| • If using stereo or A/V receiver, check that AUDIO OUT LEFT/ |
|
| RIGHT on TV’s back panel is connected to the A/V receiver. |
|
|
|