Mitsubishi Electronics WD-52631 manual Lamp Indicator, Status Indicator, POWER/TIMER Indicator

Page 16

16Chapter 1. Television Overview

Front-Panel Indicators

Off Steady On Slow Blinking Fast Blinking

LAMP Indicator

LED Color

TV Condition

Additional Information

None

Normal TV on or standby condition.

Normal operation.

 

 

 

 

 

Green

TV just powered off and lamp is

Starts to blink 30 seconds after turning off TV. TV can be turned

cooling.

on before blinking starts or after blinking stops, but not while the

 

 

 

indicator is blinking. Normal operation.

 

 

 

Yellow

1. Lamp access door is open or

TV will not operate until lamp access door is secure. See Appen-

not secure.

dix C for installation information.

 

 

 

 

 

2. No lamp installed.

TV will not operate without a lamp. See Appendix C for installa-

 

tion information.

 

 

Red

Lamp no longer illuminates and has

Replace the lamp. The TV will not operate when the lamp no

 

reached the end of the lamp life.

longer illuminates. See Appendix C for installation information.

STATUS Indicator

LED Color

TV Condition

Additional Information

None

Normal TV on or standby condition.

Normal operation.

 

 

 

Yellow

Room temperature is too high.

TV will not operate when the ambient room temperature is too

high. Turn off the TV and wait until the room temperature drops.

 

 

 

 

 

Red

TV may require service.

Turn off the TV and unplug the set from the AC power source.

 

 

Wait one minute and then plug the set back in.

 

 

If the LED is still on, contact your dealer or a Mitsubishi Authorized

 

 

Service Center. See www.mitsubishi-tv.com or call 1-800-332-

 

 

2119 to receive Authorized Service Center information.

 

 

 

POWER/TIMER Indicator

LED Color

TV Condition

Additional Information

 

 

 

None

TV is powered off.

Normal operation.

 

 

 

Green

TV is powered on.

Normal operation.

 

 

 

 

Green

1.

TV just plugged into AC outlet.

 

 

 

 

 

2. AC just restored after power

 

 

 

failure.

 

 

3.

TV Rebooting after System

Wait until blinking stops before turning on (approximately 1

 

 

Reset used.

 

 

 

minute). Normal operation.

 

4. TV Rebooting after power

 

 

 

 

fluctuation or receiving abnor-

 

 

 

mal digital signals from digital

 

 

 

channel, CableCARD™, or

 

 

 

digital device.

 

 

 

 

 

5. You have begun the procedure

For detailed information, see the instructions that accompany the

 

 

to update software from an

authorized software update. Important: Do not use unauthorized

 

 

authorized flash memory device.

software at any time.

 

 

 

Green

TV is powered off and auto-on timer

Normal operation. TV can be turned on at any time.

is set.

 

 

 

 

 

 

 

Page 15 Page 17
Image 16
Page 15 Page 17
Contents WD-52631 WD-57731 WD-65731 U T I O N For Your Records Model Number check one WD-52631WD-57731WD-65731Serial Number Purchase Date Retailer Name LocationContents Operating Other Devices with the Remote Control Using the TV with a Personal ComputerUsing Ieee 1394 Devices AppendicesStand Requirement Demo ModeStandby Fan General Cleaning Warnings Top and Sides of the TVScreen Unauthorized SoftwareImportant Safeguards Read, Retain and Follow All InstructionsPower Lines Page Package Contents Special Features of Your TV Television OverviewPackage Contents Special Features of Your TVGuidelines for Setting Up and Using Your New Widescreen TV Additional TV SetupDigital Cable Ready CableCARD, Models WD-57731 Getting StartedControlling Sound Volume Turning the TV On or OffIf You Turn Off the TV by Mistake Changing ChannelsSystem Reset Button ResetTV Front Panel Control PanelLamp Indicator Status IndicatorPOWER/TIMER Indicator LED Color TV Condition Additional InformationUsing a CableCARD CableCARD menu Network SetupCableCARD Technology CableCARD MenuTV Back Panel ANT 1/MAIN, ANT 2/AUX AntennaCableCARD Slot Input 1 and 2 InputsComponent 1 and 2 Inputs Hdmi 1Page TV Connections Before You Begin Choosing a Language for MenusMore About Auto Input Sensing Ieee 1394 ConnectionsDigital Video and Home Recording Connection Type into the TV Effect on Home RecordingPicture Quality Name Signal Type Connection TypesVideo and Combined Audio/Video Connections Audio-Only ConnectionsHdtv Cable Box or Satellite Receiver with Component Video Nent /AUDIO Left and Audio Right onWall Outlet Cable no cable box Can be used with a CableCARD, models WD-57731For an antenna with flat twin leads VHF LeadsFor cable or antenna with coaxial lead VCR to an Antenna or Wall Outlet Cable OptionalConnecting a VCR to a cable box VCR to a Cable Box Audio & VideoConnecting an Hdmi device Receiver Stereo System DVD Player with Component VideoTo connect an analog A/V receiver Older Cable Box CamcorderTV Operation Remote Control OverviewRecord/Playback Keys VOLBattery Installation Sleep TimerResetting the Remote Control Low-Battery IndicatorUsing ChannelView Feature InstructionsChoosing a Program Source ChannelView Channel ListingsStatus Display Analog ProgramDigital Program Digital Ieee 1394 DeviceTV Signals and Display Formats Signal DefinitionsDVD Definitions TV Display Format DefinitionsTV Display Formats Split Screen OperationSplit Screen Operations Instructions PAUSE. PressTV Inputs for Split Screen Split Screen DisplaysANT Input Component Page TV Menu Settings 3D Graphical Menu System Remote Control ButtonsMenu Screens Main Menu Setup Menu Clock Setup MenuLanguage Setup Menu Memorize Channels Setup MenuSetting the Clock Automatically Set TimeDevice ChannelInput Name Menu Icon Order MenuDVD DVD2 VCRChannel Menu TerminologyFAV Setup Using the Channel Menu Using FAV ChannelsFAV Setup Using Only the Remote Control FAV Channel MenuCaptions Menu FontSize ColorBackground Opacity FontParental Lock Menu Lock by Time Parental Lock MenuFront Panel Lock Parental Lock Menu Front Panel LockRatings Menu Other Ratings MenuBypassing the Ratings Lock and Lock by Time TV Ratings TV Content CategoriesMovie Ratings Audio/Video Menu Analog and Digital Audio Settings Analog-Only Audio SettingsDigital-Only Audio Settings Ieee 1394 Amplifier SettingsPersonal Computer Video Settings Contrast BrightnessTV Menu Settings Operating Other Devices with the Remote Control Functions Available for Other A/V Devices Programming the Remote Control Method 1 Code EntryMethod 2 Code Search Code VerificationResetting the Remote Control Programming CodesAudio Lock Universal A/V Receiver Control Audio Amplifiers Brand CodeGPX JBLKLH CD Players Brand CodeCable Boxes Brand Code NSC TFCDVD Players/Recorders Brand Code AMWNEC JSISVA Laser Disc Players Brand Code Satellite Receivers Brand CodeGOI HTSVCRs and DVRs Brand Code STS TMKPage Using the TV with a Personal Computer Video Adjustments SetupTo Remove the Computer Icon from the Input Selection Menu Computer with DVI Monitor Output Connecting a Computer to the TVComputer with Hdmi Monitor Output Connecting a computer with a VGA 15-pin monitor output Computer with VGA 15-Pin Monitor Output Analog VideoAdjusting Image Resolution Select Control PanelAvailable for your computer’s video signal As Displayed on TV ScreenFormat 16 X 9 Standard 3 Standard 640 XUsing Ieee 1394 Devices Direct Device-To-Device Method OverviewHub Connection Method Tips for Connecting Ieee 1394 Devices Ieee 1394 AmplifiersIeee 1394 Devices and the Input Selection Menu Ieee 1394 CamcordersImmediate Recording from the Recording Setup Menu Time-Delayed Recording from the MenuRecording Signal Type TV Input Recording to Ieee 1394 Recordable DevicesTime-Delayed Recording from ChannelView To Cancel a Recording in ProgressTo Cancel a Scheduled Recording Immediate Recording from ChannelViewTo Power On or Off a Compatible Ieee 1394 Device TV Remote Control and Ieee 1394 DevicesOperation of Ieee 1394 Devices with the TV’s Remote Control Retention Period DiscsTo Copy a Track to Another Ieee 1394 Device Switching Between Analog and Digital Ieee 1394 Outputs Appendix B Specifications Appendix D TroubleshootingPage Appendix a Bypassing the Parental Lock Bypassing the Parental LockThis page intentionally left blank Appendix B Specifications Inputs Description Qty Signal Type Input SpecificationsPicture Technology ReceptionDigital Interfaces Outputs Description Qty Output SpecificationsHdmi Lamp Life Appendix C Lamp Cartridge ReplacementTo Order a New Lamp Installing the New Lamp Cartridge Removing the Old Lamp CartridgeDisposal of the Old Lamp Cartridge TighteningAppendix D Troubleshooting TV Reset FunctionsReset Name When to Use How to Use Resulting Action Demo Mode Off buttonService Service and SupportSupport General TV Operation Symptom Remarks TV Channels Symptom RemarksTV Power On/Off Symptom Remarks Picture Symptom RemarksIndicators Symptom Remarks Sound Symptom RemarksIeee 1394 Recording Symptom Remarks Ieee 1394 Devices Symptom RemarksAppendix D Troubleshooting Trademark and License Information Mitsubishi TV Software 103To Obtain Warranty Service 104105 This Limited Warranty does not CoverMitsubishi Digital Electronics AMERICA, INC Index VCR Demo Mode MDEAservice@mdea.comSystem Reset
Top Page Image Contents