121. Additional TV Features
Specialized TV Connections
Photos and Motion Video as Composite Video
Connect the camera to the TV using a composite video cable and control the slide show or movie through the camera. The display resolution will be
1.Refer to the owner’s manual supplied with the camera for instructions needed for this setup.
2.Set the camera’s output signal type to NTSC and put the camera into playback mode.
3.With the camera still turned on, connect your digital camera’s composite video cable (usually yellow) to the TV’s Y composite video jack. To hear audio, connect the camera’s audio output cable to the audio L jack.
|
|
| CENTER SUB WOOFER |
| L |
|
|
| INPUT OUTPUT |
| |
|
| HDMI |
| ANT | 3D |
|
| GLASSES | |||
|
|
|
| EMITTER | |
1 | 2 | 3 | 4 | DIGITAL | R |
|
|
|
|
| |
|
|
|
| AUDIO |
|
|
|
|
| OUTPUT |
|
TV jack panel
L
Using the TV with an Audio-Only Device
To use the TV speakers to listen to an audio device such as an MP3 or CD player with analog output, follow these steps.
1.Insert an unused
Y composite video jack. The presence of this con- nector activates the TV’s
2.When the TV detects the video connector, it will display the New Device Found screen. Name the new input CD/Audio or MP3 Player.
3.Connect left (white) and right (red) audio cables from AUDIO OUT on the device to L and R on the TV.
4.Keep the connector in the Y jack while using the
AUDIO/SURROUND
R
DIGITAL
AUDIO
OUTPUT
|
|
| CENTER SUB WOOFER |
| L |
|
|
| INPUT OUTPUT |
| |
|
| HDMI |
| ANT | 3D |
|
| GLASSES | |||
|
|
|
| EMITTER | |
1 | 2 | 3 | 4 | DIGITAL | R |
|
|
|
|
| |
|
|
|
| AUDIO |
|
|
|
|
| OUTPUT |
|
R
Optional
Audio Cable
Camera connection using a composite video cable
4.When the New Device Found screen displays, assign the name Camcorder.
5.Press EXIT to close the New Device Found screen.
6.If viewing photos, control the slideshow from the camera. Advance through the images manually or check if the camera can advance automatically.
TV jack panel
Audio cables 2.
L
R
Unused
1.
For assistance call 1(800)